Denco supplier catalog / Accessory reference

RC ACP00953: Linear AP-5 Single Portal Access Controller

The AP-5 supplier listing describes single-portal access control for gates and parking or industrial facilities.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Denco catalog number: RC ACP00953. Keep the complete supplier number, including prefixes and suffixes. This identifies the supplier catalog listing.

A corresponding manufacturer part number or equivalent component has not been verified. Any manufacturer or designation stated by the supplier is labeled separately below.

Denco equipment source: RC ACP00953Product detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Denco equipment source: RC ACP00953Product detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier identification fact	The AP-5 supplier listing describes single-portal access control for gates and parking or industrial facilities. Denco equipment source: RC ACP00953Product title and description; technical table where stated · checked 2026-09-13 · Denco
Supplier identification fact	The source gives alternative capacities of 480 block-coded transmitters or 238 individual transmitters/wireless keypad codes, plus six MGT safety-edge transmitters. Denco equipment source: RC ACP00953Product title and description; technical table where stated · checked 2026-09-13 · Denco
Supplier identification fact	Relay activation can be programmed up to 120 seconds, with timed or latched operation. Denco equipment source: RC ACP00953Product title and description; technical table where stated · checked 2026-09-13 · Denco
Supplier identification fact	The stated power range is 12-24 V AC or DC. Denco equipment source: RC ACP00953Product title and description; technical table where stated · checked 2026-09-13 · Denco
Scope and source limitation	Do not add the alternative transmitter capacities together. Denco equipment source: RC ACP00953Product detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco
Scope and source limitation	Power compatibility with most gate operators is not exact-model evidence. Denco equipment source: RC ACP00953Product detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco
Scope and source limitation	MGT transmitter scope does not establish compatibility for any unspecified downstream gate system. Denco equipment source: RC ACP00953Product detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Denco catalog source before selecting a component.

Direct replacement paths

No direct successor for RC ACP00953 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: RC ACP00953 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco equipment source: RC ACP00953Denco · US · checked 2026-09-13

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Denco catalog source and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.