Spring Repair

Garage door spring repair starts with a safely secured door.

A broken or weak spring can leave the door too heavy for the opener and difficult to control. Stop operating the door, keep people clear, and arrange an inspection. Spring replacement requires matching the counterbalance system to the actual door, not just choosing a spring that looks similar.

Availability is confirmed for the exact service address before scheduling.

Garage Door Spring Repair

Match the spring to the door and lift system

Match the spring to the door and lift system

A technician checks the door weight, dimensions, spring configuration, drums, and available space before selecting a replacement. Wire size, diameter, length, wind direction, and cycle rating all matter. A visible break identifies a failed spring, but the cables, bearings, drums, and attachment points still need inspection.

What professional spring repair includes

The door is secured before loaded hardware is handled. The proposed spring work and price are explained, and the system is checked for balance and controlled movement after the approved repair. Opener operation and safety reversal should be checked after the door itself moves correctly.

The technician explains the recommended work and price before any approved repair begins.

The estimate depends on the spring system and any related wear found during inspection. Confirm the visit charge and approve the repair price before work begins.

Brands we service & repair

LiftMaster, Chamberlain, Genie, Wayne Dalton, Clopay, and Amarr.

Garage door spring replacement cost: what your quote includes

How much does spring replacement cost?

For a published U.S. reference, The Home Depot lists $250–$500 for springs in its garage-door repair guide. That is not an Anderson price or a guaranteed installed total. The guide does not specify one spring versus a pair, and it lists labor separately without making its treatment in that spring range clear. See The Home Depot’s cost reference.

For your door, ask for a complete installed quote that identifies the spring system, the number of springs being replaced, included labor and visit charges, and any other necessary work. Anderson’s repair price is explained before the work is approved. Service availability is confirmed for your ZIP and exact address before scheduling.

The first question is not just “What does a spring cost?” It is “What spring work does this total buy?”

Check spring-repair availability →

One spring or two: compare the actual system

A quote to replace one spring is not directly comparable with a quote to replace a pair. Nor should a door designed with one spring be treated as a two-spring door just because another door has two.

When one spring breaks on a two-spring door, DASMA recommends replacing both. Ask the technician to identify the installed system and explain the replacement specifications. If a proposal retains the companion spring, ask for the reason and remaining uncertainty in writing. This is a system decision, not a reason to buy a second spring based on a photograph. DASMA spring and cable safety guidance.

One spring or two: compare the actual system
What the proposal describesWhat to clarify before comparing its price
Replacement on an existing one-spring systemThe replacement specification, included installation work and completion checks.
Replacement on an existing two-spring systemWhether the total covers both springs; ask how the proposal addresses DASMA’s paired-spring recommendation.
A torsion or extension systemWhich system is installed and being priced. They are different arrangements, not interchangeable low-price/high-price options.
A change to the spring-system arrangementWhether this is a like-for-like repair or a separately specified conversion, and which additional components and labor it requires.

Door width alone does not establish the spring specification. The technician needs to assess the actual door and lift system. Do not loosen hardware, pull the release or operate a damaged door to collect quote information. For the safety question, read what to do when a garage door spring breaks.

What belongs in the installed total?

Ask for one agreed total, with these inclusions and exclusions made clear. A provider can bundle work; the important point is knowing what the bundle covers.

What belongs in the installed total?
Quote itemThe answer you need
Spring partsSystem type, quantity and the written specification of the proposed replacements.
Labor and completionRemoval/replacement work and the professional balance, movement and opener-safety checks included after the repair.
Visit or diagnostic chargeWhether it is additional, included, or credited if the repair proceeds.
Other diagnosed workAny cable, drum, bearing or attachment issue found; what correction is proposed and whether it is included. Inspection does not automatically mean replacement.
Optional specificationThe added price of a different cycle-rated spring option and the specification that supports it.
Timing-related chargeWhether an after-hours or other special visit charge applies to the appointment being discussed.
Tax, exclusions and warrantyThe tax basis, work outside the total, and the actual parts/labor warranty terms.

For a visit fee, ask: “If I approve this repair, is that fee already in the total, credited against it, or still payable on top?” Count it once. Do not add a fee again when the provider has already included it. Our service-call fee guide explains the questions to settle before booking.

Why two quotes for the same broken spring can disagree

Consider two proposals for a door that already has two springs. One includes only the failed spring. The other includes both springs, a separately identified cable repair and the visit charge. Even without knowing either price, you can see that they are not offers for the same work.

First resolve whether the pair should be replaced and whether the cable repair is actually required. Then ask each provider for a total covering that agreed scope. Keep optional work separate. The lower original number may simply omit work; the higher number is not proof that every extra item is necessary.

This is an illustrative scope comparison, not a customer case or a sample Anderson quote. No price has been invented for either proposal. Use the repair-quote comparison guide when the providers disagree about the diagnosis as well as the price.

Is a higher-cycle spring worth more?

Ask what exact option is being offered and what it adds to the installed price. A stated cycle rating describes a specification; it does not promise a break date, a number of maintenance-free calendar years or a particular warranty.

Compare the written rating, the suitability confirmed for your door, the additional charge and the actual warranty document. Do not infer the age of the existing spring from its appearance. If you have a dated installation record, share it; otherwise leave its age unknown.

Your project record

Keep a spring proposal record

Record the system, exact work and quantity; the companion-spring reason; labor, visit-fee treatment, tax basis and exclusions; separate optional work; and written parts/labor terms. Leave unanswered items unresolved. Entries stay on this page until reload and are not a service request; print to keep a copy.

Ask for the complete spring-repair scope

Tell Anderson the door’s current position, what you noticed and your service ZIP. Include an existing brand/model record if you have one. You do not need to measure a spring or move the door to start the conversation.

Ask for the proposed spring work, included charges and exclusions before approving the repair. A ZIP check is not a booked appointment; availability and timing are confirmed for the actual address.

Check availability and request spring repair →

Source note

The price reference is a third party’s published cost-guide entry, checked October 16, 2026. It is not an Anderson offer, a Connecticut price, or evidence of a particular spring quantity or installed package. DASMA supports the paired-spring recommendation and professional handling of loaded hardware. This is buying guidance, not an inspection or a spring-sizing instruction.

Sources & review

Last reviewed: October 16, 2026. Source references were checked for the claims cited in this guide. Prices and product terms can change.

Prepared with AI assistance and checked against the cited source material for factual scope. This is editorial buying guidance; the actual equipment, work, price and terms require a project-specific proposal.

Illustrations are AI-generated concepts rather than photographs of customer installations.

Common questions

Can I use the opener with a broken spring?

Stop using it. The opener is not a substitute for the counterbalance system. Keep the opening clear and do not disconnect or lift an unstable door to test it.

Do both springs need to be replaced?

When one spring breaks on a two-spring door, DASMA recommends replacing both. Ask the technician to explain how that guidance applies to your installed system and to identify the springs included in the quote. A door designed with one spring is a different case.

Can I identify the replacement from a photograph?

A photograph can help identify the system and explain the symptom, but it does not establish the door weight or full replacement specification. Do not unwind, loosen or remove a spring to obtain measurements.

One Request. Three Simple Steps.

Let’s start with your door.

No need to leave this page. You can change your answers at any step.

  1. 1 The problem
  2. 2 Your location
  3. 3 Contact details

Your request is sent to Anderson. Appointment timing and any visit charge are confirmed with you.

What do you need help with?

Selected service: Spring repair. You can change this.

If the door is crooked or partly open, keep clear. Do not adjust springs or cables yourself.

From our customers

What customers say on Google

G5.0★★★★★9 reviews
6 written Google reviews

Mama Bear

3 weeks ago

G
★★★★★
The service was fantastic- courteous, knowledgeable and honest.
Excerpt from Google review

Yehuda Robinov

a month ago

G
★★★★★
Very very professional guys good jobs good service

adam ricker

3 months ago

G
★★★★★
Great worker

David Avitan

3 months ago

G
★★★★★
They replaced three garage door motors for me, and the service was excellent from start to finish.
Excerpt from Google review

Mary larson

4 months ago

G
★★★★★
Very good service and very polite

Tippawan Markmaitree-Babin

4 months ago

G
★★★★★
Very good work, polite and flexible in scheduling appointments.

Reviews from Google. Rating and relative dates checked October 1, 2026. This is a dated snapshot, not a live feed.

Serving your home with pride

Check service availability in your area.

Call now to discuss the problem and check availability for your ZIP. The exact service address is confirmed before scheduling.

Call (203) 902-3902