Marantec / Accessory reference

Marantec 384

Marantec 384: The supplier identifies Marantec 384 as a four-button transmitter at 315 MHz.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Manufacturer identifier: 384. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Denco supplier reference: RC 122468Product h1 and span.sku; Description exact features, compatibility, replacements and conditions · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detail	The supplier identifies Marantec 384 as a four-button transmitter at 315 MHz. Denco supplier reference: RC 122468Product h1 and span.sku; Description exact features, compatibility, replacements and conditions · checked 2026-09-12 · Denco
Supplier-stated detail	The supplier states that it replaces M3-2314. Denco supplier reference: RC 122468Product h1 and span.sku; Description exact features, compatibility, replacements and conditions · checked 2026-09-12 · Denco
Selection limitation	This is a directed supplier replacement assertion, not universal installed-opener fitment or reverse interchange. Keep the full M3-2314 number and existing Marantec model/revision holds. Denco supplier reference: RC 122468Product h1 and span.sku; Description exact features, compatibility, replacements and conditions · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Marantec official support before selecting a component.

Direct replacement paths

No direct successor for 384 is verified in this reference.

Earlier numbers this item is listed to replace

384 replaces M3-2314 only within the following source scope.
Denco names 384 as a replacement for M3-2314. The supplier states a direct replacement only. Other Marantec models, revisions and existing source/technical holds remain separate.
Applies only within this source scope
- Market: US
- replacement-purpose: Replacement of the exact named remote or keypad; installed receiver and required functions must be checked.
- replacement-format: 315 MHz; verify the installed receiver and programming requirements.
- Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test.
- The supplier states a direct replacement only. Other Marantec models, revisions and existing source/technical holds remain separate.
- Denco supplier reference: RC 122468Product h1 and span.sku; Description exact features, compatibility, replacements and conditions · checked 2026-09-12 · Denco

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: 384 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: RC 122468Denco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Marantec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.