Equipment reference / R00141087 R00141088 SMT3000 SMT3000C SMR3215
Rytec Clean-Roll photoeyes: conflicting numbers and bracket choices
Check the standard-versus-egress transmitter/receiver discrepancy before selecting a sensor; distinguish complete remote assemblies from bare brackets.
Identification details & limits
Reference identifier: R00141087 R00141088 SMT3000 SMT3000C SMR3215. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.
- Rytec Clean-Roll owner manual, December 10, 2014R0715004, December 10, 2014, PDF page 34 / printed page 28: Rytec Clean-Roll photoeyes: conflicting numbers and bracket choices · checked 2026-09-13 · R0715004, December 10, 2014 · Rytec
- Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsR0215002 Rev AD (2021-03-24), PDF page 52, printed page 45: Rendered label R0012053 · checked 2026-09-13 · AD (2021-03-24), R0215002 · Rytec
| Exact number: White plastic counterweight guide | R0705084
|
|---|---|
| R0705084 | White plastic counterweight guide.
|
| Exact number: Spacer plate in counterweight-base figure | RS703419
|
| RS703419 | Spacer plate in counterweight-base figure.
|
| RS021035 | Flat washer. PDF36 instead labels this number as a lock washer. This Clean-Roll identity or role remains unresolved; no new definite fitment is approved.
|
| Exact number: Lock washer, 3/8 inch | RS554225
|
| RS554225 | Lock washer, 3/8 inch.
|
| Exact number: Bolt, 3/8-16 by 1.5 inches | RS021069
|
| RS021069 | Bolt, 3/8-16 by 1.5 inches.
|
| R00141088 | Transmitter below SMT3000C label. Reversed number relative to PDF32 and PDF41. This Clean-Roll identity or role remains unresolved; no new definite fitment is approved.
|
| R00141087 | Receiver below SMR3215 label. Reversed number relative to PDF32 and PDF41. This Clean-Roll identity or role remains unresolved; no new definite fitment is approved.
|
| Exact number: Short remote transmitter assembly | R07991572
|
| R07991572 | Short remote transmitter assembly. Includes bracket, photoeye and cable; no exact sensor-number mapping approved.
|
| Exact number: Short remote receiver assembly | R07991573
|
| R07991573 | Short remote receiver assembly. Includes bracket, photoeye and cable; no exact sensor-number mapping approved.
|
| Exact number: Long left remote receiver assembly | R0799367
|
| R0799367 | Long left remote receiver assembly. Includes bracket, photoeye and cable; no exact sensor-number mapping approved.
|
| Exact number: Long right remote transmitter assembly | R0799368
|
| R0799368 | Long right remote transmitter assembly. Includes bracket, photoeye and cable; no exact sensor-number mapping approved.
|
| Exact number: Short remote-photoeye bracket only | S702429
|
| S702429 | Short remote-photoeye bracket only. Printed S prefix; no R or RS alias inferred.
|
| Exact number: Long remote-photoeye bracket only | RS703524
|
| RS703524 | Long remote-photoeye bracket only.
|
| Exact number: Shared photoeye cable | R0012053
|
| Existing exact-number reference: R0012053 | R0012053
|
| R0012053 | Shared photoeye cable.
|
| R1080059-1X | Left egress column weldment. Serial-selected reference label. Preserve the X-ended reference label; obtain the complete configured ordering number from Rytec.
|
| R1080059-2X | Right egress column weldment. Serial-selected reference label. Preserve the X-ended reference label; obtain the complete configured ordering number from Rytec.
|
| R1080186-1X | Left egress column cover. Serial-selected reference label. Preserve the X-ended reference label; obtain the complete configured ordering number from Rytec.
|
| R1080186-2X | Right egress column cover. Serial-selected reference label. Preserve the X-ended reference label; obtain the complete configured ordering number from Rytec.
|
| R00141087 | Rear transmitter, SMT3000 decal. Role conflicts with egress diagram on PDF34. This Clean-Roll identity or role remains unresolved; no new definite fitment is approved.
|
| R00141088 | Rear receiver, SMR3215 decal. Role conflicts with egress diagram on PDF34. This Clean-Roll identity or role remains unresolved; no new definite fitment is approved.
|
| R0012053 | Photoeye cable, four poles, M12 connector, 50 feet.
|
| Serial and revision scope | Clean-Roll manual R0715004, revision December 10, 2014. Confirm the exact door serial number and installed configuration with Rytec; equipment changes and special engineering can change the fitted parts. This historical reference does not establish current stock, a successor, whole-door fitment or an installation procedure.
|
| Quantities are not supplied | These illustrated labels do not provide an order-quantity table. Numeric quantities remain unknown; pictured multiplicity is not converted into a purchasing count.
|
| Conflicting sensor roles | Standard and common-spares sections assign R00141087 to the transmitter and R00141088 to the receiver. The egress diagram reverses those numbers. Sensor roles for that egress configuration need manufacturer resolution; no egress sensor fitment or corrected SKU is inferred.
|
| Assemblies versus brackets | R07991572 and R07991573 are the short transmitter and receiver assemblies. R0799367 is the long left receiver assembly and R0799368 the long right transmitter assembly. Each assembly includes a bracket, photoeye and cable. S702429 and RS703524 are bracket-only numbers; the short bracket retains its printed S prefix. No exact sensor-to-assembly pairing is approved while the sensor-number discrepancy remains.
|
| Washer discrepancy | The egress counterweight figure calls RS021035 a flat washer; the bearing figure calls it a lock washer. No Clean-Roll hardware fitment edge or corrected identity is approved for this number.
|
Sources & review dates
- Rytec Clean-Roll owner manual, December 10, 2014Rytec · US · checked 2026-09-13 · R0715004, December 10, 2014
- Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsRytec · US · checked 2026-09-13 · AD (2021-03-24), R0215002
This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.
The cited sources define the product details shown here; comparison does not establish fitment. Anderson’s repair service covers its listed Connecticut communities; this national reference does not imply nationwide service.