Equipment reference / Rytec Fast-Seal strapless windbars: stops and breakaway limitation
Rytec Fast-Seal strapless windbars: stops and breakaway limitation
Identify the bumper and stop assemblies while retaining the warning that nonbreakaway stops change impact behavior.
Identification details & limits
Reference identifier: Rytec Fast-Seal strapless windbars: stops and breakaway limitation. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.
| Dual-strapless stop, welded in place | R0203290
|
|---|---|
| Windbar cushion-stop assembly | R02992164
|
| Cushion-stop bolt: 5/16-18 by 1 inch | R0550070
|
| Cushion-stop nut: 5/16-18 | R0553104
|
| Nonbreakaway stop | R02992797 is the nonbreakaway stop weldment. The manual says fitting these stops prevents the door from breaking away if impacted; this is not presented as a safety upgrade or retrofit recommendation.
|
| Pickup bracket | R02992077 is the windbar bumper bracket, restricted to strapless windbars. Its labelled hardware is R0550123, 3/8-16 by 3-1/4 inches, and R0553229, 3/8-16 nut.
|
| Quantity boundary | Pickup-bracket quantity varies with door width. No complete-door hardware quantity is calculated.
|
| Serial and revision scope | This reference describes the March 2021 manual currently linked by Rytec as the 17-inch side-column owner manual. The manual also includes other column sizes. Match the exact column, hand, installed generation and door serial number with Rytec; the source warns that engineered or later parts may differ.
|
| Nonbreakaway stop weldment | R02992797
|
| Strapless windbar bumper bracket | R02992077
|
| Bumper bracket bolt, 3/8-16 by 3-1/4 inches | R0550123
|
| Bumper bracket nut, 3/8-16 | R0553229
|
| Windbar combination exclusion | Strapped and strapless windbars may be used on opposite sides but not together on the same side. Two strapless windbars may share one side; only one strapped windbar is allowed per side. No exact retrofit kit is identified.
|
| Dual windbar neck and stop distinction | The upper windbar has the larger-diameter neck and the lower has the smaller neck. The upper stops in this edition are notched flat steel plates welded into guide notches; this differs from the bolted stop-plate arrangement shown in the September 2025 installation manual.
|
- Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsR0215002 Rev AD (2021-03-24), PDF page 70, printed page 63: Reviewed identification labels and configuration notes · checked 2026-09-13 · AD (2021-03-24), R0215002 · Rytec
- Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsR0215002 Rev AD (2021-03-24), PDF page 71, printed page 64: Additional exact component labels · checked 2026-09-13 · AD (2021-03-24), R0215002 · Rytec
- Rytec Fast-Seal installation manualR0215001 December 2, 2014, PDF page 21 / printed page 17: Windbar combination exclusion · checked 2026-09-13 · R0215001 December 2, 2014 · Rytec
- Rytec Fast-Seal installation manualR0215001 December 2, 2014, PDF page 27 / printed page 22: Dual windbar neck and stop distinction · checked 2026-09-13 · R0215001 December 2, 2014 · Rytec
- Rytec Fast-Seal (FS1000) installation manual1022104-0 Rev 01, September 2025, PDF page 22 / printed page 22: Bolted upper stop plates and exact fastener identifiers · checked 2026-09-13 · 1022104-0 Rev 01, September 2025 · Rytec
Sources & review dates
- Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsRytec · US · checked 2026-09-13 · AD (2021-03-24), R0215002
- Rytec Fast-Seal (FS1000) installation manualRytec · US · checked 2026-09-13 · 1022104-0 Rev 01, September 2025
- Rytec Fast-Seal installation manualRytec · US · checked 2026-09-13 · R0215001 December 2, 2014
This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.
The cited sources define the product details shown here; comparison does not establish fitment.