Equipment reference / Rytec Fast-Seal tension rollers, shafts and clamshell hardware
Rytec Fast-Seal tension rollers, shafts and clamshell hardware
Separate spring-strap and tension-strap rollers, identify upper and lower shafts, and check the numbered clamshell assembly. Exact shaft lengths are not documented.
Identification details & limits
Reference identifier: Rytec Fast-Seal tension rollers, shafts and clamshell hardware. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.
| Left-hand H-bracket mount | 1022011-1A01
|
|---|---|
| Right-hand H-bracket mount | 1022011-2A01
|
| Spring-strap roller | 0205037
|
| Tension-strap roller | 0205038
|
| Long upper shaft | 1022015-0
|
| Long lower shaft | 1022016-0
|
| Short lower shaft | 1022017-0
|
| Bronze washer: 3/4-inch inside diameter, 1.375-inch outside diameter | 0003068
|
| 3/4-inch retaining ring | 0558168
|
| Bearing: 3/4-inch bore, 1-5/8-inch outside diameter, 1/2-inch width | 0204039
|
| Stainless washer: 0.75-inch ID, 1.13-inch OD, 0.13-inch thickness | 5550434-0A04
|
| Shoulder screw: 0.75-inch shoulder diameter, 5/8-11 by 3.50 inches | 5550433-0A01
|
| 5/8-11 nylon-insert jam nut | 0021040
|
| Idler bracket | 1022030-0A01
|
| Washer labelled 0.63-inch inside diameter | 5550128-0Z01
|
| H-bracket clamshell assembly | 1022013-0A01
|
| Separate clamshell | 1022014-0A01
|
| Bushing and spacer conflict | 0003067 is used for both a brass flanged bushing and a nylon spacer measuring 1.50 by 0.75 by 0.75 inches. Its material and geometry remain unresolved.
|
| Shaft-selection boundary | Upper/lower and long/short labels distinguish the three numbers. The reviewed table does not supply their exact lengths or make them interchangeable.
|
| Serial and revision scope | These are identification facts from the September 2025 manual linked as the 14-inch side-column owner manual. Some rows explicitly cover 17-inch columns. Confirm the exact door serial number, column size and installed configuration with Rytec. Configured dimensions and placeholder variants are not fixed stock or universal fitment.
|
| Listed hardware for 1022013-0A01: 5/16-18x1 flange screw; source table quantity 4 | 0550060
|
| Listed hardware for 1022013-0A01: 5/16-18 flange locknut; source table quantity 4 | 0553104
|
| Three different strap roles | The tension strap is wider than the counterweight strap and occupies a separate drum spool. Neither is automatically equivalent to a windbar strap.
|
| Spring strap versus tension strap | The preinstalled spring strap connects the tension spring to the H-bracket; the field-installed tension strap connects the drum, H-bracket and end bracket. Separate functions do not establish a replacement length or interchangeable strap.
|
- Rytec Fast-Seal FS1000 owner manual, 14-inch link with explicit 17-inch component rows1022105-0 Rev 01 (09/25), PDF/printed page 72: Reviewed configuration and component labels · checked 2026-09-13 · 1022105-0, Rev 01, 09/25 · Rytec
- Rytec Fast-Seal (FS1000) installation manual1022104-0 Rev 01, September 2025, PDF page 15 / printed page 15: Three different strap roles · checked 2026-09-13 · 1022104-0 Rev 01, September 2025 · Rytec
- Rytec Fast-Seal (FS1000) installation manual1022104-0 Rev 01, September 2025, PDF page 18 / printed page 18: Spring strap versus tension strap · checked 2026-09-13 · 1022104-0 Rev 01, September 2025 · Rytec
Sources & review dates
- Rytec Fast-Seal FS1000 owner manual, 14-inch link with explicit 17-inch component rowsRytec · US · checked 2026-09-13 · 1022105-0, Rev 01, 09/25
- Rytec Fast-Seal (FS1000) installation manualRytec · US · checked 2026-09-13 · 1022104-0 Rev 01, September 2025
This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.
The cited sources define the product details shown here; comparison does not establish fitment.