Equipment reference / Rytec Fast-Seal bottom-bar electronics: wireless and coil-cord labels

Rytec Fast-Seal bottom-bar electronics: wireless and coil-cord labels

Identify the sealed wireless parts, 8.2K resistor and 36-inch cord while preserving battery and generation limits.

Identification details & limits

Reference identifier: Rytec Fast-Seal bottom-bar electronics: wireless and coil-cord labels. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
PVC tubing: 2 mm ID and 4 mm OD0007321
Existing exact-number reference: 00073210007321
Sealed wireless mobile unit1210463-0
DW-40AMP air switch with bracket0211397
Existing exact-number reference: 02113970211397
8.2K ring-terminal resistor1210832-0
Existing exact-number reference: 1210832-01210832-0
Battery-block mounting plate1020082-1
Tabbed D-cell; voltage and chemistry not stated00111193
Existing exact-number reference: 0011119300111193
D-cell holder00111192
Existing exact-number reference: 0011119200111192
Twist-on sealed connector1210464-0
Long three-wire breakaway switch0204019
Short three-wire breakaway switch0204018
Coil-cord resistor scopeThe coil-cord page also lists 1210832-0 as 8.2K. Do not substitute a 1.2K part based on another model’s diagram, or assume all coil-cord systems use the same resistor.
Legacy cord boundaryThe newer manual describes unprefixed 0704075 as a four-wire, 36-inch black cord. The legacy R0704075 is separately described as 24 inches. No prefix removal, successor or equivalence is approved.
Battery specification remains unknownThe D-cell label supplies neither voltage nor chemistry. The separate controller’s 3 V CR2032 specification cannot be transferred to this battery.
Configuration ambiguity1020049-1X has differing wireless/end-block roles and stays a placeholder. The coil-cord page retains a WIRELESS label on 1020082-1; shared components do not prove a conversion kit or wireless generation pairing.
Serial and revision scopeThese are identification facts from the September 2025 manual linked as the 14-inch side-column owner manual. Some rows explicitly cover 17-inch columns. Confirm the exact door serial number, column size and installed configuration with Rytec. Configured dimensions and placeholder variants are not fixed stock or universal fitment.
Bottom-bar cover with cord grip1060061-0
Existing exact-number reference: 1060061-01060061-0
Cable strain relief0204048
Four-wire black coil cord, 36 inches0704075
Listed hardware for 0211397: #8-32x1/20021029
Existing exact-number reference: 00210290021029
Listed hardware for 0211397: #8-32nut0553180
Existing exact-number reference: 05531800553180
Listed hardware for 0211397: #8lockwasher0554179
Existing exact-number reference: 05541790554179
Listed hardware for 1020082-1: #8-32x1stainlessS021064
Listed hardware for 1020082-1: #8-32nut0553180
Existing exact-number reference: 05531800553180
Listed hardware for 1020082-1: #8lockwasher0554179
Existing exact-number reference: 05541790554179
Listed hardware for 1060061-0: 1/4-20x3/85550025-0

Sources & review dates

  1. Rytec PredaDoor NXT and PredaCool owner manual: parts sectionRytec · US · checked 2026-09-13 · 1060730-0, Rev01 (07/25)
  2. Rytec Fast-Seal FS1000 owner manual, 14-inch link with explicit 17-inch component rowsRytec · US · checked 2026-09-13 · 1022105-0, Rev 01, 09/25

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

The cited sources define the product details shown here; comparison does not establish fitment. Anderson’s repair service covers its listed Connecticut communities; this national reference does not imply nationwide service.

Call (203) 902-3902 — Check Today's Availability