Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Rytec FlexTec hood: Standard versus T/XL covers and hardware-table limits

Rytec FlexTec hood: Standard versus T/XL covers and hardware-table limits

Compare handed motor covers, fork pockets and serial-selected hood/head assemblies.

US source scopeReference updated 2026-09-14

Identification details & limits

Reference identifier: Rytec FlexTec hood: Standard versus T/XL covers and hardware-table limits. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
1230075-XStandard head assembly. Serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230074-1*Left-drive front spreader. Standard; wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230074-2*Right-drive front spreader. Standard; wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230077-0A01Standard drive-side guard.
Sources for this component

Description and scope

Exact identifier

1230078-1A01Standard left counterweight guard.
Sources for this component

Description and scope

Exact identifier

1230078-2A01Standard right counterweight guard.
Sources for this component

Description and scope

Exact identifier

1230079-0A01Standard fork pocket. Quantity2.
Sources for this component

Description and scope

Exact identifier

1230080-0*Standard hood cover. One or two depending on width; wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230081-1A01Standard left-drive motor cover.
Sources for this component

Description and scope

Exact identifier

1230081-2A01Standard right-drive motor cover.
Sources for this component

Description and scope

Exact identifier

1230082-0A01Standard motor-cover cap. Left or right drive.
Sources for this component

Description and scope

Exact identifier

Table-specific limitVerify Standard versus XL using the door serial. Hardware-table wildcard rows are not full exact SKU selectors.
1230102-XT/XL head assembly. Serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230103-1*T/XL left-drive front spreader. Wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230103-2*T/XL right-drive front spreader. Wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230093-0A01T/XL drive-side guard.
Sources for this component

Description and scope

Exact identifier

1230094-1A01T/XL left counterweight guard.
Sources for this component

Description and scope

Exact identifier

1230094-2A01T/XL right counterweight guard.
Sources for this component

Description and scope

Exact identifier

1230079-0B01FlexTec T fork pocket. Quantity2.
Sources for this component

Description and scope

Exact identifier

1230117-0*T/XL hood cover. One or two depending on width; wildcard, serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1230119-1A01T/XL left-drive motor cover.
Sources for this component

Description and scope

Exact identifier

1230119-2A01T/XL right-drive motor cover.
Sources for this component

Description and scope

Exact identifier

Table-specific limitThe T/XL hardware table repeats Standard parent numbers for spreader, head, guard and cover rows. Only fork-pocket parent changes to1230079-0B01. Do not silently rewrite the repeated parent numbers.
Serial and revision scopeFlexTec/FlexTec XL, manual1230068-0 Rev02 January2020. Confirm the installed door serial, drive hand and Standard/T/XL configuration with Rytec. Custom engineering and later changes can alter installed parts. Historical identification evidence does not establish stock, a successor, warranty entitlement or a repair procedure.
Selection boundaryThe T/XL diagram changes major component numbers while much of its hardware table repeats Standard parents. Do not rewrite those parent numbers or transfer hardware to the T/XL covers. The fork-pocket table explicitly changes1230079-0A01 to1230079-0B01.
Referenced part number1230075-X
Referenced part number1230074-1*
Referenced part number1230074-2*
Referenced part number1230080-0*
Referenced part number1230102-X
Referenced part number1230103-1*
Referenced part number1230103-2*
Referenced part number1230117-0*
FlexTec installation-document scope1230069-0 Rev3 May2021. Select this document for the named variant and confirm the individual door serial and object list.
FlexTec width-dependent sectionsIn this installation revision the front spreader is one piece through 121 inches of production width and three pieces above 121 inches. The optional top cover is one piece through 97 inches and two pieces above 97 inches. These thresholds do not identify a complete orderable assembly.
FlexTec cover hardwareThe top-cover illustration identifies 0551050 screws: six for a one-piece cover and twelve for a two-piece cover. The motor cover shows four and its cap two. Motor cover/cap selection is a separate option; confirm the supplied configuration.
FlexTec T installation-document scope1230135-0 Rev3 May2021. Select this document for the named variant and confirm the individual door serial and object list.
FlexTec T width-dependent sectionsIn this installation revision the front spreader is one piece through 121 inches of production width and three pieces above 121 inches. The optional top cover is one piece through 97 inches and two pieces above 97 inches. These thresholds do not identify a complete orderable assembly.
FlexTec T cover hardwareThe top-cover illustration identifies 0551050 screws: six for a one-piece cover and twelve for a two-piece cover. The motor-cover illustration shows six. Motor cover/cap selection is a separate option; confirm the supplied configuration.
FlexTec XL installation-document scope1230122-0 Rev2 May2021. Select this document for the named variant and confirm the individual door serial and object list.
FlexTec XL width-dependent sectionsIn this installation revision the front spreader is one piece through 121 inches of production width and three pieces above 121 inches. The optional top cover is one piece through 97 inches and two pieces above 97 inches. These thresholds do not identify a complete orderable assembly.
FlexTec XL cover hardwareThe top-cover illustration identifies 0551050 screws: six for a one-piece cover and twelve for a two-piece cover. The motor-cover illustration shows six. Motor cover/cap selection is a separate option; confirm the supplied configuration.
Installation evidence boundaryThese 2021 configuration facts do not resolve the repeated parent numbers in the 2020 owner-manual hardware tables. No transfer of hardware to an uncertain parent, complete kit or later replacement is established.

Sources & review dates

  1. Rytec FlexTec and FlexTec XL manual, January2020Rytec · US · checked 2026-09-13 · 1230068-0 Rev02 January2020
  2. Rytec FlexTec installation manualRytec · US · checked 2026-09-13 · 1230069-0 Rev3 May2021
  3. Rytec FlexTec XL installation manualRytec · US · checked 2026-09-13 · 1230122-0 Rev2 May2021
  4. Rytec FlexTec T installation manualRytec · US · checked 2026-09-13 · 1230135-0 Rev3 May2021

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.