Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Rytec FlexTec motor: wired FEIG encoder contents and cable ratings

Rytec FlexTec motor: wired FEIG encoder contents and cable ratings

Identify the ABM KG252 encoder assembly, its seven listed constituents and separately labelled cables. Cable numbers 00142016 and 00142017 have conflicting source descriptions; compare the cited editions before selection.

US source scopeReference updated 2026-09-15

Identification details & limits

Reference identifier: Rytec FlexTec motor: wired FEIG encoder contents and cable ratings. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
1170767-0ABM motor assembly for System 4. Door serial required. Treat as a configured ordering reference, not a universally orderable fixed selection.
1060618-0FEIG encoder assembly for ABM KG252.
Sources for this component

Description and scope

Exact identifier

1170774-0FEIG encoder mounting plate for ABM KG252.
Sources for this component

Description and scope

Exact identifier

00141030Short FEIG encoder shaft end.
Sources for this component

Description and scope

Exact identifier

00141134Wired encoder with pigtail.
Sources for this component

Description and scope

Exact identifier

00111199Encoder battery, 3.67 V. The label includes 1650 without a unit; no capacity unit inferred.
Sources for this component

Description and scope

Exact identifier

0005401Cable tie with push-stud mount.
Sources for this component

Description and scope

Exact identifier

01260320M10 by 25 mm hex bolt.
Sources for this component

Description and scope

Exact identifier

S55031710-24 Phillips screw.
Sources for this component

Description and scope

Exact identifier

0014108615 m M12 female type-A 8-pin encoder cable.
Sources for this component

Description and scope

Exact identifier

S703988FEIG shaft coupler.
Sources for this component

Description and scope

Exact identifier

5550015-0Z01Washer, 1.425 by .41 by .135.
Sources for this component

Description and scope

Exact identifier

S5542253/8 split lock washer, stainless.
Sources for this component

Description and scope

Exact identifier

001420233/4 NPT cord grip. Label mentions 6 conductor; not a motor voltage.
Sources for this component

Description and scope

Exact identifier

00142016This manual describes: 16 AWG shielded 4-conductor cable. 32 ft; 600 V and 90 C are cable ratings. Cable construction is unresolved; compare the conflicting source description below.
Sources for this component

Description and scope

Exact identifier

Conflicting source description: 00142016Spiral/Spiral Prewire manual 1072467-0 Rev03 (August 2025), page 107, labels 00142016 as 18 AWG, two-conductor unshielded cable, with 600 V and 90 C cable ratings. This differs from this page's original manual description. Obtain Rytec confirmation of the installed cable construction before ordering or substituting.
00142017This manual describes: 18 AWG unshielded 2-conductor cable. 32 ft; 600 V and 90 C are cable ratings. Cable construction is unresolved; compare the conflicting source description below.
Sources for this component

Description and scope

Exact identifier

Conflicting source description: 00142017Spiral/Spiral Prewire manual 1072467-0 Rev03 (August 2025), page 107, labels 00142017 as 16 AWG, four-conductor shielded cable, with 600 V and 90 C cable ratings. This differs from this page's original manual description. Obtain Rytec confirmation of the installed cable construction before ordering or substituting.
00144911/2 NPT cord grip.
Sources for this component

Description and scope

Exact identifier

1210623-0Plastic 3/4-to-1/2 NPT reducer.
Sources for this component

Description and scope

Exact identifier

Table-specific limit1060618-0 explicitly includes 0005401,00111199,00141030,00141134,1170774-0,01260320(2),S550317(2). Cable00141086 is separately labelled and not in the contents list. No wireless encoder equivalence.
Serial and revision scopeFlexTec/FlexTec XL, manual1230068-0 Rev02 January2020. Confirm the installed door serial, drive hand and Standard/T/XL configuration with Rytec. Custom engineering and later changes can alter installed parts. Historical identification evidence does not establish stock, a successor, warranty entitlement or a repair procedure.
Selection boundary1060618-0 explicitly lists seven component identifiers. The separate15m encoder cable00141086 is outside that contents list. Cable600V/90C ratings do not establish motor supply. No wireless encoder interchange is documented.
Referenced part number1170767-0
FlexTec encoder label discrepancyThe encoder illustration caption prints 1060618-0 while the depicted label prints H1060618-0. Preserve both spellings and confirm the installed label with Rytec; this is not evidence of an alias or replacement.
FlexTec T encoder label discrepancyThe encoder illustration caption prints 1060618-0 while the depicted label prints H1060618-0. Preserve both spellings and confirm the installed label with Rytec; this is not evidence of an alias or replacement.
FlexTec XL encoder label discrepancyThe encoder illustration caption prints 1060618-0 while the depicted label prints H1060618-0. Preserve both spellings and confirm the installed label with Rytec; this is not evidence of an alias or replacement.
Referenced part numberH1060618-0
Exact component number1260320
1260320Bolt shown with the FlexTec encoder mounting arrangement
1260320 identification limitThe illustration shows two bolts and an 8.8 head marking. It does not specify a complete thread and length. Do not infer dimensions from the illustrated wrench or substitute a look-alike bolt.
Separate encoder cableThe installation manual labels the connecting cable 00141086 separately from the encoder. This supports a component distinction, not proof that the cable is included with every encoder package.

Sources & review dates

  1. Rytec PredaDoor NXT and PredaCool owner manual: parts sectionRytec · US · checked 2026-09-13 · 1060730-0, Rev01 (07/25)
  2. Rytec Fast-Seal FS1000 owner manual, 14-inch link with explicit 17-inch component rowsRytec · US · checked 2026-09-13 · 1022105-0, Rev 01, 09/25
  3. Rytec FlexTec and FlexTec XL manual, January2020Rytec · US · checked 2026-09-13 · 1230068-0 Rev02 January2020
  4. Rytec FlexTec installation manualRytec · US · checked 2026-09-13 · 1230069-0 Rev3 May2021
  5. Rytec FlexTec XL installation manualRytec · US · checked 2026-09-13 · 1230122-0 Rev2 May2021
  6. Rytec FlexTec T installation manualRytec · US · checked 2026-09-13 · 1230135-0 Rev3 May2021
  7. Rytec PredaClean manual, May 2024Rytec · US · checked 2026-09-13 · R0715010, May 2024
  8. Rytec Spiral and Spiral Prewire owner manual1072467-0 Rev03 August2025Rytec · US · checked 2026-09-13 · 1072467-0 Rev03 August2025

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.