Equipment reference / Rytec Plexline drum: handed references and bearing-prefix discrepancies

Rytec Plexline drum: handed references and bearing-prefix discrepancies

Identify the drum and panel-clamp references while exposing unresolved prefixes before component selection.

Identification details & limits

Reference identifier: Rytec Plexline drum: handed references and bearing-prefix discrepancies. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
P1160034-1X01Left drum-weldment reference with printed P prefix; serial required
Referenced part numberP1160034-1X01
1160034-2X01Right drum-weldment reference lacks matching prefix; serial required
Referenced part number1160034-2X01
R0702010Panel clamp reference; serial required
Referenced part numberR0702010
R0556167Rivet identified for panel clamp
Exact component numberR0556167
Exact-number source traceR0556167
R0704145Bearing label in two diagrams; differs from lower-right prefix
Referenced part numberR0704145
RS0704145Lower-right bearing label; no alias to R0704145 established
Referenced part numberRS0704145
R1160033-1XNon-counterweighted drum/panel/motor assembly reference
Referenced part numberR1160033-1X
RS5532293/8-16 nut
Exact component numberRS553229
Exact-number source traceRS553229
RS0210353/8 flat washer; existing hold remains
Referenced part numberRS021035
RS5500143/8-16 by 1.25-inch screw
Exact component numberRS550014
Exact-number source traceRS550014
Serial and revision scopeHistorical Plexline owner manual. Ordering requires the installed door serial; engineering changes can change fitted parts. Left and right use the manual's front view. Per-door wiring and matching controller/door serials remain required. Warranty pages are historical conditional notices, not present entitlement. No PL5000/PL5500 family expansion from warranty headings.
Selection boundaryThe left drum reference prints P1160034-1X01 while the right prints 1160034-2X01. Bearing labels alternate between R0704145 and RS0704145. No corrected prefix, handed counterpart, alias or blanket hardware association is inferred. The drum/panel/motor reference concerns the illustrated non-counterweighted configuration only.

Sources & review dates

  1. Rytec Clean-Roll owner manual, December 10, 2014Rytec · US · checked 2026-09-13 · R0715004, December 10, 2014
  2. Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsRytec · US · checked 2026-09-13 · AD (2021-03-24), R0215002
  3. Rytec Pharma Seal manual, December 29, 2014Rytec · US · checked 2026-09-13 · RPR150001, December 29, 2014
  4. Rytec Plexline owner manual R1160103-0 RevAA, August 3 2017Rytec · US · checked 2026-09-13 · R1160103-0 RevAA August 3 2017

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

The cited sources define the product details shown here; comparison does not establish fitment. Anderson’s repair service covers its listed Connecticut communities; this national reference does not imply nationwide service.

Call (203) 902-3902 — Check Today's Availability