Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Rytec PredaDoor drum support: bearing, bracket and optional spacer

Rytec PredaDoor drum support: bearing, bracket and optional spacer

Read the bearing identity and the manual’s optional spacer condition without turning it into a universal installed fitment rule.

US source scopeReference updated 2026-09-14

Identification details & limits

Reference identifier: Rytec PredaDoor drum support: bearing, bracket and optional spacer. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
Flange bearing labelled 1.25 diameter; unit not explicit0704010
Non-drive bearing bracket1060100-0Z01
Optional spacer; source lists quantity two for the stated configuration0703353
Spacer conditionThe source describes the optional spacer for panel height at least 156 inches OR four windribs, on both sides. Confirm the actual serial-specific arrangement; the condition does not prove that a spacer is installed.
Configured drum and strap1060661-0X is a configured drum/strap assembly. It includes a drum weldment and mounting strap whose number varies. X is not expanded into invented variants.
Loop material0007138 identifies configured adhesive-backed loop material with a stated width of 1.5 inches; the required length is not established here.
Serial number and manual scopeThis reference identifies parts in Rytec manual 1060730-0, Rev01 (07/25), which covers PredaDoor NXT and PredaCool. Match the installed door serial number, drive hand and configuration with Rytec before ordering. Shared manual coverage does not establish that every part fits both models or every custom door.
2020: R0703353Motor-side spacer. Condition: PH > 14 feet OR windrib count >= 5. Table quantity: A/R.
Referenced part numberR0703353
2020: R05500241/2-13 by 2-inch screw. Condition: PH > 14 feet OR windrib count >= 5. Table quantity: 4.
Referenced part numberR0550024
2020: R1060339-0XEurodrive-shaft drum configuration. This row does not establish a quantity. The X/XX label is configured; no concrete suffix is invented.
Referenced part numberR1060339-0X
2020: R5550024-0Z041/8 by 1-1/4-inch spring pin. Table quantity: 2.
Referenced part numberR5550024-0Z04
2020: R1060108-0XNon-drive bearing configuration for 2.88- or 3.63-inch centerline. Table quantity: 1. The X/XX label is configured; no concrete suffix is invented.
Referenced part numberR1060108-0X
2020 edition boundaryThe added 2020 entries apply only to R1060169-0 Rev AD (February 21 2020). Earlier facts on this page keep their own cited revision. R, P and RS prefixes and full suffixes are retained as printed, without cross-edition aliases, replacements or universal model fitment. Match the installed serial and configuration with Rytec.
Spacer threshold differs by editionThe 2020 table associates R0703353 and the longer R0550024 screw with PH greater than 14 feet OR at least five windribs. The existing 2025 reference states at least 156 inches OR four windribs for 0703353. These are separately scoped rules; the R prefix is not removed and neither threshold is transferred to the other edition.
2018 spacer configurationThe 2018 manual describes two 9 by 1-3/4-inch steel spacers for oversized doors. It associates three or more wind ribs with drive-side and opposite-side spacers, and two or fewer with no spacer material. This historical rule does not establish a cutoff for later installations.
2025 spacer selection limitThe 2025 installation source lists two optional spacers for larger doors without stating a size or wind-rib threshold. Confirm the installed configuration rather than transferring the older rule.

Sources & review dates

  1. Rytec PredaDoor NXT and PredaCool owner manual: parts sectionRytec · US · checked 2026-09-13 · 1060730-0, Rev01 (07/25)
  2. Rytec PredaDoor NXT Installation ManualRytec · US · checked 2026-09-13 · 1060729-0 Rev 02, 06/25
  3. Rytec PredaDoor NXT Installation ManualRytec · US · checked 2026-09-13 · R1060168-0 AB, November 1 2018
  4. Rytec PredaDoor NXT 2020 owner manual; directory link labelled PredaFlexRytec · US · checked 2026-09-13 · R1060169-0 Rev AD February 21 2020

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.