Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Rytec PredaDoor pneumatic edge: bladder, tubing, connectors and switch

Rytec PredaDoor pneumatic edge: bladder, tubing, connectors and switch

Identify the pneumatic components by exact numbers and retain the separate switch-hardware statement.

US source scopeReference updated 2026-09-14

Identification details & limits

Reference identifier: Rytec PredaDoor pneumatic edge: bladder, tubing, connectors and switch. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
Air bladder: 6.88-inch body; includes tubing 08042190713000
PVC tubing labelled 3/16 inside diameter and 5/16 outside diameter0804219
DW-40AMP air switch; includes bracket0211397
90-degree barbed elbow labelled 3/160204552
Y connector labelled 3/160804336
PVC tubing: 2 mm inside diameter and 4 mm outside diameter0007321
Straight tube connector labelled 3/160804337
Air-switch hardware: number 8-32 by 1/2 screw0021029
Air-switch hardware: number 8-32 nut0553180
Switch hardwareThe table separately lists two each of 0021029 and 0553180 for air switch 0211397. This is an explicit component association, subject to the serial-specific door configuration.
Dimensional boundaryThe reviewed notes retain the fractional connector and tube labels as printed; their unit is not independently supplied here. Metric tubing is explicitly identified in millimeters.
Repeated parts and unresolved blocksThe coil-cord page repeats pneumatic components, which remain single identities. Its conflicting end-block labels do not establish a replacement or wireless-to-coil-cord conversion.
Serial number and manual scopeThis reference identifies parts in Rytec manual 1060730-0, Rev01 (07/25), which covers PredaDoor NXT and PredaCool. Match the installed door serial number, drive hand and configuration with Rytec before ordering. Shared manual coverage does not establish that every part fits both models or every custom door.
2020: R1060058-0Bottom-bar weight. Table quantity: 1.
Referenced part numberR1060058-0
2020: P0701081Plated bottom-bar weight. Condition: P prefix retained. Table quantity: 1.
Referenced part numberP0701081
2020: R07991514Foam edge assembly. Table quantity: 1.
Referenced part numberR07991514
2020: R1060322-0Vinyl loop seal for five-inch foam. Table quantity: 1.
Referenced part numberR1060322-0
2020: R0804219PVC tube with 3/16 ID and 5/16 OD. Condition: row does not explicitly state diameter unit. Table quantity: A/R.
Referenced part numberR0804219
2020: R1060044-1Z00Left wireless end block. Table quantity: 1.
Referenced part numberR1060044-1Z00
2020: R1060044-2Z00Right wireless end block. Table quantity: 1.
Referenced part numberR1060044-2Z00
2020: R0713000Air bladder with6.88-inch body. Table quantity: 1.
Referenced part numberR0713000
2020: R0211397Bircher DW-40AMP air switch. Condition: table marks drive-side-only but diagram also depicts item3 on non-drive side; preserve conflict. Table quantity: 1. No definite side assignment or side exclusion is established by this conflicting source.
Referenced part numberR0211397
2020: R0007321PVC tube:2mm ID,4mm OD,3-inch length. Condition: motor/drive side only. Table quantity: 1.
Referenced part numberR0007321
2020: R0804336Y connector for 3/16-inch tube. Condition: motor/drive side only; conflicting same number at item8. Table quantity: 1. Exact ordering identity remains withheld: The same number identifies Y and straight connector geometries in this source.
Referenced part numberR0804336
2020: R0804336Straight connector for 3/16-inch tube. Condition: non-drive side only; conflicting same number at item7. Table quantity: 1. Exact ordering identity remains withheld: The same number identifies Y and straight connector geometries in this source.
Referenced part numberR0804336
2020: R020455290-degree barbed elbow for 3/16-inch tube. Condition: motor/drive side only. Table quantity: 1.
Referenced part numberR0204552
2020: R0021029Number8-32 by half-inch screw. Condition: compare prior stud/screw descriptions; no silent role rewrite. Table quantity: 2. Exact ordering identity remains withheld: The screw/stud description needs exact source reconciliation before promoting this new identity.
Referenced part numberR0021029
2020: R0553180Number8-32 nut. Table quantity: 2.
Referenced part numberR0553180
2020 edition boundaryThe added 2020 entries apply only to R1060169-0 Rev AD (February 21 2020). Earlier facts on this page keep their own cited revision. R, P and RS prefixes and full suffixes are retained as printed, without cross-edition aliases, replacements or universal model fitment. Match the installed serial and configuration with Rytec.
2020 connector and switch conflictR0804336 labels both a drive-side Y connector and a non-drive straight connector in the 2020 table. No definite geometry is assigned to an exact part result. R0211397 has a drive-only table mark but appears at the non-drive side in the diagram; no definite side fitment is derived. These discrepancies do not rewrite the separately sourced 2025 records.
Exact-number source traceR1060044-1Z00
Exact-number source traceR1060044-2Z00
Exact-number source traceR0713000
Exact-number source traceR0211397
Exact-number source traceR0007321
2018 switch contact distinctionThe non-drive-side reversing-edge switch is described as normally open and having a resistor. The separate drive-side breakaway kill switch is described as normally closed on printed page 17. Similar appearance does not establish interchangeability.
  • Rytec PredaDoor NXT Installation ManualR1060168-0 AB, November 1 2018, PDF page 20 / printed page 16: 2018 switch contact distinction · checked 2026-09-13 · R1060168-0 AB, November 1 2018 · Rytec
2025 door-ajar identificationThe door-ajar breakaway switch has no resistor and light-blue wires in this installation revision. It is a distinct function from the reversing edge; no sensitivity or bypass procedure is supplied here.

Sources & review dates

  1. Rytec PredaDoor NXT and PredaCool owner manual: parts sectionRytec · US · checked 2026-09-13 · 1060730-0, Rev01 (07/25)
  2. Rytec Clean-Roll owner manual, December 10, 2014Rytec · US · checked 2026-09-13 · R0715004, December 10, 2014
  3. Rytec PredaDoor NXT Installation ManualRytec · US · checked 2026-09-13 · 1060729-0 Rev 02, 06/25
  4. Rytec PredaDoor NXT Installation ManualRytec · US · checked 2026-09-13 · R1060168-0 AB, November 1 2018
  5. Rytec Plexline owner manual R1160103-0 RevAA, August 3 2017Rytec · US · checked 2026-09-13 · R1160103-0 RevAA August 3 2017
  6. Rytec PredaDoor NXT 2020 owner manual; directory link labelled PredaFlexRytec · US · checked 2026-09-13 · R1060169-0 Rev AD February 21 2020
  7. Rytec Sure-Seal owner manual R1170931-0 RevA, March 1 2020Rytec · US · checked 2026-09-13 · R1170931-0 RevA March 1 2020

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.