Equipment reference / Spiral HZ 2013 encoder and antenna brackets: corner alternatives and hardware

Spiral HZ 2013 encoder and antenna brackets: corner alternatives and hardware

Distinguish four corner references, their shared mounting hardware and the separate antenna bracket without equating coating suffixes.

Identification details & limits

Reference identifier: Spiral HZ 2013 encoder and antenna brackets: corner alternatives and hardware. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
Selection boundaryDrawing 48/BOM49 labels 60-inch XR encoder package, separate antenna bracket and four handed corner alternatives. Printed L/L-S wording differs from chapter L/L-R, so no family-model expansion. StainlessZ04 hardware is not Z01 hardware.
00141120XR wireless encoder with 60in antenna — Listed component.
Sources for this component

Description and scope

Exact identifier

1070699-1Z01Left upper corner bracket; printed L/L-S scope — Listed component.
Sources for this component

Description and scope

Exact identifier

1070699-2Z01Right upper corner bracket; printed L/L-S scope — Listed component.
Sources for this component

Description and scope

Exact identifier

1070702-1Z01Left upper corner bracket S/S-R — Listed component.
Sources for this component

Description and scope

Exact identifier

1070702-2Z01Right upper corner bracket S/S-R — Listed component.
Sources for this component

Description and scope

Exact identifier

1070678-0Z01Wireless antenna bracket. Antenna fastening uses 5550052-0Z04 screws, 5550055-0Z04 washers and 5550057-0Z04 locknuts. Connection to the selected corner bracket uses 5550054-0Z04 screws, 5550055-0Z04 washers and 5550053-0Z04 hex nuts — Listed component.
Sources for this component

Description and scope

Exact identifier

5550052-0Z04M4x 16 stainless flat-head screw — Listed component.
Sources for this component

Description and scope

Exact identifier

5550055-0Z04M4 stainless flat washer — Listed component.
Sources for this component

Description and scope

Exact identifier

5550057-0Z04M4 stainless locknut — Listed component.
Sources for this component

Description and scope

Exact identifier

5550053-0Z04M4 stainless hex nut — Listed component.
Sources for this component

Description and scope

Exact identifier

5550054-0Z04M4x 12 stainless screw — Listed component.
Sources for this component

Description and scope

Exact identifier

00111188M12 brake proximity sensor — Listed component.
Sources for this component

Description and scope

Exact identifier

Serial and revision scopeSpiral HZ (Hurricane Zone), R0915017 revision August 5, 2013. Confirm matching door serial at column, drive and controller and use the installed door-specific wiring diagram. No present-day hurricane rating, code approval, warranty entitlement or whole-family fitment inferred. L columns are nominal 9.5 in (240 mm as printed); S columns 14 in (350 mm as printed). Hand is viewed from the front. Confirm serial-specific dimensions; generic substitution wording does not identify an exact successor.

Sources & review dates

  1. Rytec Spiral and Spiral Prewire owner manual1072467-0 Rev03 August2025Rytec · US · checked 2026-09-13 · 1072467-0 Rev03 August2025
  2. Rytec Spiral HZ owner manual R0915017 August5 2013Rytec · US · checked 2026-09-13 · HZ R0915017 August5 2013

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

The cited sources define the product details shown here; comparison does not establish fitment.