Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Spiral 2014 L drive: shafts, key, bearing and guard boundaries

Spiral 2014 L drive: shafts, key, bearing and guard boundaries

Compare direct pulley hardware, drive/non-drive coupler numbers and literal shortened guard/weldment references.

US source scopeReference updated 2026-09-13

Identification details & limits

Reference identifier: Spiral 2014 L drive: shafts, key, bearing and guard boundaries. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
Selection boundaryDrive/non-drive coupler shafts have different lengths and exact numbers. Bearing support is X-configured. Preserve RWN018-B and literal historical coupler suffixes; no relation to newer unprefixed spacer numbers. The source states that the drive and non-drive shafts have different lengths, but prints no numerical length for either coupler. Select the stated drive position and confirm the installed configuration by serial.
R0013013Rubber bumper — Listed component.
Sources for this component

Description and scope

Exact identifier

R05531045/16-18 bumper nut — Listed component.
Sources for this component

Description and scope

Exact identifier

R231314-XDoor bearing support — Serial-configured or incomplete reference.
Referenced part numberR231314-X
R0153103610 x 8 x 36 key — Listed component.
Sources for this component

Description and scope

Exact identifier

RWN018-BThrust spacer — Listed component.
Sources for this component

Description and scope

Exact identifier

R01260272M8 x 16 bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R205532Drive pulley, HTD P64-8M-30 — Listed component.
Sources for this component

Description and scope

Exact identifier

R237859Z1Drive shaft bearing — Listed component.
Sources for this component

Description and scope

Exact identifier

R01340150Shim ring, 35 x 45 x 2 — Listed component.
Sources for this component

Description and scope

Exact identifier

R205533Flanged secondary pulley, HTD P64-8M-30 — Listed component.
Sources for this component

Description and scope

Exact identifier

R01180525M8 x 1.25 coupler bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R237503-1-0Z01L/L-R drive-side shaft coupler — Listed component.
Sources for this component

Description and scope

Exact identifier

R237503-2-0Z01L/L-R non-drive shaft coupler — Listed component.
Sources for this component

Description and scope

Exact identifier

Selection boundaryMain shaft weldment and top seal require serial/length selection. Main shaft reference visibly begins P; no correction to R. Motor-mount hand determines guard. Head-to-column bolts and washers are separate hardware for the pictured mounting position.
P217706Z1L drive shaft weldment; literal P prefix — Serial-configured or incomplete reference.
Referenced part numberP217706Z1
R231336BZ1L/L-R belt guard for left motor mount — Listed component.
Sources for this component

Description and scope

Exact identifier

R23133BRZ1L/L-R belt guard for right motor mount; literal shortened number — Listed component.
Sources for this component

Description and scope

Exact identifier

R01900820M8 x 1.25 x 20 T40 guard screw — Listed component.
Sources for this component

Description and scope

Exact identifier

R01260310M10 x 20 head-to-column bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R01060043Flat 10.5 mm washer — Listed component.
Sources for this component

Description and scope

Exact identifier

R01260280M8 x 25 motor-mount bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R1070419-0Motor opening edge protector — Listed component.
Sources for this component

Description and scope

Exact identifier

R04010180Top door seal — Serial-configured or incomplete reference.
Referenced part numberR04010180
Serial and revision scopeHistorical Spiral R0915004 revision December 30, 2014. L/L-R side column is listed as 9.5 inches (240 mm), S/S-R as 14 inches (350 mm); retain the source's nominal unit pairs without treating them as exact conversions. Confirm door serial, configuration and individual wiring schematic; illustrations may differ from installed custom parts. R prefixes and suffixes remain literal, with no equivalence to unprefixed or newer numbers.

Sources & review dates

  1. Rytec Fast-Seal owner manual, current 17-inch link with mixed column-size partsRytec · US · checked 2026-09-13 · AD (2021-03-24), R0215002
  2. Rytec Spiral owner manual R0915004 December30 2014Rytec · US · checked 2026-09-13 · R0915004 December30 2014

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.