Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Equipment reference / Spiral 2014 S drive: bearing, coupler and guard numbers

Spiral 2014 S drive: bearing, coupler and guard numbers

Distinguish primary/secondary key labels, drive/non-drive coupler numbers and handed guard hardware.

US source scopeReference updated 2026-09-13

Identification details & limits

Reference identifier: Spiral 2014 S drive: bearing, coupler and guard numbers. Compare each listed detail with the exact product and the source document. Do not submit a personal serial number or access code to this website.

Identification and scope details from the cited sources; each row retains its source locator.
Selection boundaryHeading says STT-S while the bearing housing is explicitly SST-S. Coupler drive/non-drive lengths differ. Separate motor-hand guards share their displayed securing screw. Key R01531420 is not normalized to R0531420. The source states that the drive and non-drive shafts have different lengths, but prints no numerical length for either coupler. Select the stated drive position and confirm the installed configuration by serial.
R238879Z1SST-S bearing-house assembly — Listed component.
Sources for this component

Description and scope

Exact identifier

R238856Z1Bearing case with bearing — Listed component.
Sources for this component

Description and scope

Exact identifier

R0134021045 x 55 x 1 shim ring — Listed component.
Sources for this component

Description and scope

Exact identifier

R206513S secondary pulley, HTD P77-8M-50 — Listed component.
Sources for this component

Description and scope

Exact identifier

R0153142014 x 9 x 56 secondary-pulley key — Listed component.
Sources for this component

Description and scope

Exact identifier

R0134023050 x 62 x 2 shim ring — Listed component.
Sources for this component

Description and scope

Exact identifier

R01180525M8 x 1.25 coupler bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R010800308 mm lock washer — Listed component.
Sources for this component

Description and scope

Exact identifier

R238503-1-01Z1S/S-R drive-side shaft coupler — Listed component.
Sources for this component

Description and scope

Exact identifier

R238503-2-01Z1S/S-R non-drive shaft coupler — Listed component.
Sources for this component

Description and scope

Exact identifier

R238353-1DZ1S/S-R belt guard, left motor mount — Listed component.
Sources for this component

Description and scope

Exact identifier

R238353-2DZ1S/S-R belt guard, right motor mount — Listed component.
Sources for this component

Description and scope

Exact identifier

R01900820M8 x 1.25 x 20 T40 screw — Listed component.
Sources for this component

Description and scope

Exact identifier

R01260310M10 x 20 head-mount bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R0106004310.5 mm head-mount flat washer — Listed component.
Sources for this component

Description and scope

Exact identifier

R0180008010.5 mm motor-mount flat washer — Listed component.
Sources for this component

Description and scope

Exact identifier

R01260320M10 x 25 motor-mount bolt — Listed component.
Sources for this component

Description and scope

Exact identifier

R1070419-0Motor opening edge protector — Listed component.
Sources for this component

Description and scope

Exact identifier

Serial and revision scopeHistorical Spiral R0915004 revision December 30, 2014. L/L-R side column is listed as 9.5 inches (240 mm), S/S-R as 14 inches (350 mm); retain the source's nominal unit pairs without treating them as exact conversions. Confirm door serial, configuration and individual wiring schematic; illustrations may differ from installed custom parts. R prefixes and suffixes remain literal, with no equivalence to unprefixed or newer numbers.

Sources & review dates

  1. Rytec Spiral owner manual R0915004 December30 2014Rytec · US · checked 2026-09-13 · R0915004 December30 2014
  2. Rytec Sure-Seal owner manual R1170931-0 RevA, March 1 2020Rytec · US · checked 2026-09-13 · R1170931-0 RevA March 1 2020

This independent reference preserves the source’s stated scope. It does not report an Anderson installation inspection, product test or safety clearance.

Continue with the exact equipment.

Browse model guides & official documents →

Browse published equipment references →

Missing from this collection?

Check the full supplier number and the cited source. A missing variant or specification remains unverified.

Look up an exact part or supplier number →

The cited sources define the product details shown here; comparison does not establish fitment.