Denco supplier catalog / Accessory reference

LO RDGRNCARD: Warning Device Option Board with Red/Green Light Box

LO RDGRNCARD is a warning-device option-board listing with a red/green light box. Denco supplier assertion for the US reference catalog; confirm the installed equipment and applicable revision. This is not manufacturer engineering verification.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Denco catalog number: LO RDGRNCARD. Keep the complete supplier number, including prefixes and suffixes. This identifies the supplier catalog listing.

A corresponding manufacturer part number or equivalent component has not been verified. Any manufacturer or designation stated by the supplier is labeled separately below.

Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco

Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier catalog number	LO RDGRNCARD Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Supplier-stated detail	LO RDGRNCARD is a warning-device option-board listing with a red/green light box. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Supplier-stated detail	The source limits use to L2 and L3 Logic control boards. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Supplier-stated detail	It describes moving/stationary door signaling and attachment of other 120V or 24V signal devices. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Supplier-stated detail	CPS-LN4 and CPS-L are named in the timer-function context. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Supplier-stated detail	A down mid-stop function is described. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
Scope limitation	Only L2 and L3 Logic control boards are stated. The 120V and 24V labels concern other signal devices, not confirmed board input/output ratings. The timer sentence does not define an exact signaling sequence. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationship	Evidence and conditions
CPS-L Documented compatibility From Denco catalog LO RDGRNCARD to CPS-L.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed supplier-scope connection-purpose source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco states that LO RDGRNCARD applies to CPS-L in the cited scope. Denco supplier assertion for the US reference catalog; confirm the installed equipment and applicable revision. This is not manufacturer engineering verification. Applies only within this source scope Market: US supplier-scope: Only L2 and L3 Logic control boards; timer-related signaling uses the named CPS-LN4 or CPS-L context connection-purpose: Named timer-function signaling context only; not universal sensor/operator compatibility. Denco supplier assertion for the US reference catalog; confirm the installed equipment and applicable revision. This is not manufacturer engineering verification. Only L2 and L3 Logic control boards are stated. The 120V and 24V labels concern other signal devices, not confirmed board input/output ratings. The timer sentence does not define an exact signaling sequence. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco
CPS-LN4 Documented compatibility From Denco catalog LO RDGRNCARD to CPS-LN4.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed supplier-scope connection-purpose source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco states that LO RDGRNCARD applies to CPS-LN4 in the cited scope. Denco supplier assertion for the US reference catalog; confirm the installed equipment and applicable revision. This is not manufacturer engineering verification. Applies only within this source scope Market: US supplier-scope: Only L2 and L3 Logic control boards; timer-related signaling uses the named CPS-LN4 or CPS-L context connection-purpose: Named timer-function signaling context only; not universal sensor/operator compatibility. Denco supplier assertion for the US reference catalog; confirm the installed equipment and applicable revision. This is not manufacturer engineering verification. Only L2 and L3 Logic control boards are stated. The 120V and 24V labels concern other signal devices, not confirmed board input/output ratings. The timer sentence does not define an exact signaling sequence. Denco supplier reference: LO RDGRNCARDh1; span.sku; Description paragraph1: board scope, signal-device voltages and named timer devices; Description NOTE paragraph: down mid-stop function · checked 2026-09-12 · Denco

Direct replacement paths

No direct successor for LO RDGRNCARD is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: LO RDGRNCARD · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: LO RDGRNCARDDenco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Denco catalog source and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.