Denco supplier catalog / Accessory reference

RC MMTC733T: Pulsar 733 Transmitter

The Pulsar 733 listing describes Allstar-compatible open/close/stop control for 3 doors.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Denco catalog number: RC MMTC733T. Keep the complete supplier number, including prefixes and suffixes. This identifies the supplier catalog listing.

A corresponding manufacturer part number or equivalent component has not been verified. Any manufacturer or designation stated by the supplier is labeled separately below.

Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco

Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detail	The Pulsar 733 listing describes Allstar-compatible open/close/stop control for 3 doors. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
Supplier-stated detail	Eight DIP switches and 318 MHz are listed. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
Supplier-stated detail	Wall mounting is stated. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
Selection limitation	Door capacity does not establish exact model compatibility. Addressing, button arrangement, power and manufacturer mapping are unspecified; retain the full supplier number. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco

Compare Pulsar open/close/stop door capacities

Compare the supplier-stated capacity of one, three, nine or 27 doors. These wall-transmitter listings retain their separate addressing, power and receiver limitations. Door capacity is not a button count, channel count or list of approved opener models; shared 318 MHz and eight DIP switches do not establish a pairing.

Separate references with their own source scope. This comparison establishes no replacement or interchangeability.
Exact reference	Supplier-stated detail	Selection limitation
RC MMTC831T	The Pulsar 831 listing describes Allstar-compatible open/close/stop control for 1 door. View source and citation details Denco supplier reference: RC MMTC831TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Eight DIP switches and 318 MHz are listed. View source and citation details Denco supplier reference: RC MMTC831TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Wall mounting is stated. View source and citation details Denco supplier reference: RC MMTC831TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Martec is separately named in the description. View source and citation details Denco supplier reference: RC MMTC831TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco	The wall transmitter remains separate from the 831 receiver listings. A shared number does not prove pairing; exact receivers, addressing, power and manufacturer mapping remain unresolved. View source and citation details Denco supplier reference: RC MMTC831TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
RC MMTC733T This reference	The Pulsar 733 listing describes Allstar-compatible open/close/stop control for 3 doors. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Eight DIP switches and 318 MHz are listed. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Wall mounting is stated. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco	Door capacity does not establish exact model compatibility. Addressing, button arrangement, power and manufacturer mapping are unspecified; retain the full supplier number. View source and citation details Denco supplier reference: RC MMTC733TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
RC MMTC639T	The Pulsar 639 listing describes Allstar-compatible open/close/stop control for 9 doors. View source and citation details Denco supplier reference: RC MMTC639TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Eight DIP switches and 318 MHz are listed. View source and citation details Denco supplier reference: RC MMTC639TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco Wall mounting is stated. View source and citation details Denco supplier reference: RC MMTC639TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco	Door capacity does not establish exact model compatibility. Addressing, button arrangement, power and manufacturer mapping are unspecified; retain the full supplier number. View source and citation details Denco supplier reference: RC MMTC639TProduct h1 and span.sku; Description capacity, mode, mounting if explicit, RF, switches and label · checked 2026-09-12 · Denco
RC MMTC535T	Pulsar 535 is described as a wall-mounted Allstar-compatible transmitter with open/close/stop control for 27 doors. View source and citation details Denco supplier reference: RC MMTC535TProduct h1 and span.sku; Description operation, supply/connection if supplied, switches, RF and source labels · checked 2026-09-12 · Denco The source lists eight DIP switches and 318 MHz. View source and citation details Denco supplier reference: RC MMTC535TProduct h1 and span.sku; Description operation, supply/connection if supplied, switches, RF and source labels · checked 2026-09-12 · Denco	Twenty-seven doors is the supplier-stated capacity, not an exact receiver or opener list. Addressing, button arrangement and power are unspecified; MMTC is retained as part of the supplier number, not a verified manufacturer identity. View source and citation details Denco supplier reference: RC MMTC535TProduct h1 and span.sku; Description operation, supply/connection if supplied, switches, RF and source labels · checked 2026-09-12 · Denco

A specification absent from one reference is not established by the other. Keep the exact identifier, configuration and cited revision when comparing.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Denco catalog source before selecting a component.

Direct replacement paths

No direct successor for RC MMTC733T is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

This reference has no documented compatible or incompatible pairing to check. Use the facts and source scope above to identify the item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: RC MMTC733TDenco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Denco catalog source and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.