Denco supplier catalog / Accessory reference

ROA PRO-SW4200X: Pro-SW4200XLS Dual Gate Arm

The Pro-SW4200XLS second-arm listing names PROSW4000XLS as its primary operator.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Denco catalog number: ROA PRO-SW4200X. Keep the complete supplier number, including prefixes and suffixes. This identifies the supplier catalog listing.

A corresponding manufacturer part number or equivalent component has not been verified. Any manufacturer or designation stated by the supplier is labeled separately below.

Denco equipment source: ROA PRO-SW4200XProduct detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Denco equipment source: ROA PRO-SW4200XProduct detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier identification fact	The Pro-SW4200XLS second-arm listing names PROSW4000XLS as its primary operator. Denco equipment source: ROA PRO-SW4200XProduct title and description; technical table where stated · checked 2026-09-13 · Denco
Supplier identification fact	A 50-foot power cable is included; the manufacturer table names Linear. Denco equipment source: ROA PRO-SW4200XProduct title and description; technical table where stated · checked 2026-09-13 · Denco
Scope and source limitation	This is a second-arm application, not independent gate operation. Denco equipment source: ROA PRO-SW4200XProduct detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco
Scope and source limitation	The named primary operator is PROSW4000XLS. ROA PRO-SW4200X remains the complete supplier SKU; other model-label spellings are not established as equivalent. Denco equipment source: ROA PRO-SW4200XProduct detail title and Description list; explicit table cells where recorded · checked 2026-09-13 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationship	Evidence and conditions
PROSW4000XLS Documented compatibility From Denco catalog ROA PRO-SW4200X to PROSW4000XLS.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. ROA PRO-SW4200X is listed by Denco as a second gate operator for PROSW4000XLS. Applies only within this source scope Market: US Model scope: PROSW4000XLS Supplier-listed use as a second gate operator combined with the exact named primary operator; standalone operation is not established. No source revision, installation geometry or independent manufacturer verification is supplied. Denco equipment source: ROA PRO-SW4200XProduct description: explicit second-arm/primary-operator pairing; manufacturer table names Linear · checked 2026-09-13 · Denco

Direct replacement paths

No direct successor for ROA PRO-SW4200X is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: ROA PRO-SW4200X · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco equipment source: ROA PRO-SW4200XDenco · US · checked 2026-09-13

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Denco catalog source and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.