LiftMaster / Accessory reference

LiftMaster 892LT

LiftMaster 892LT: Buttons are independently programmable for gate and garage operation.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Manufacturer identifier: 892LT. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detail	Buttons are independently programmable for gate and garage operation. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco
Supplier-stated detail	Per-button formats are Security+ 2.0 Tri-Band 310/315/390 MHz, Security+ 315 MHz and Security+ 390 MHz. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco
Supplier-stated detail	Cloning is explicitly described for LiftMaster 811LM, 61LM and 361LM DIP-code remotes. A directional visor clip is included. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco
Selection limitation	Cloning is a specific function, not proof of downstream opener fitment. 811LMX is not an alias of the named 811LM target; Security+ 3.0 support is not stated. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationship	Evidence and conditions
61LM Documented compatibility From 892LT to 61LM.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed connection-purpose source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco names 892LT in the stated application with 61LM. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Applies only within this source scope Market: US connection-purpose: Cloning a button from the exact named DIP-code remote. Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco
361LM Documented compatibility From 892LT to 361LM.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed connection-purpose source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco names 892LT in the stated application with 361LM. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Applies only within this source scope Market: US connection-purpose: Cloning a button from the exact named DIP-code remote. Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco
811LMX Documented compatibility From 811LMX to 892LT.	Denco names 811LMX in the stated application with 892LT. 811LMX has separately described 811LM, 361LM and 61LM programming modes. Those mode names are not aliases or unconditional replacement claims. Applies only within this source scope Market: US connection-purpose: Cloning with the named learning remote; verify the programmed DIP mode. Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test. 811LMX has separately described 811LM, 361LM and 61LM programming modes. Those mode names are not aliases or unconditional replacement claims. Denco supplier reference: RC 811LMh1; span.sku; Description programmable-mode parent/nested bullets; Description explicit892LT/894LT cloning bullet · checked 2026-09-12 · Denco
811LM Documented compatibility From 892LT to 811LM.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed connection-purpose source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco names 892LT in the stated application with 811LM. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Applies only within this source scope Market: US connection-purpose: Cloning a button from the exact named DIP-code remote. Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test. This is a remote-button cloning statement; it does not identify the downstream opener or establish transmitter-to-transmitter radio control. Denco supplier reference: RC 892LTh1; span.sku; Description bullets: independent protocol programming, exact DIP-code remote references and clip · checked 2026-09-12 · Denco

Direct replacement paths

No direct successor for 892LT is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: 892LT · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: RC 892LTDenco · US · checked 2026-09-12
Denco supplier reference: RC 811LMDenco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use LiftMaster official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.