Linear / Accessory reference

Linear MGT-1

Linear MGT-1: Supervised obstacle-sensing transmitter described for Linear access-control systems serving motorized gates, doors or barriers.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Manufacturer identifier: MGT-1. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Denco supplier reference: RC DNT00068h1; span.sku; Description first bullet: stated application and supervision; Description second bullet: optional .001 UF capacitor/Miller recommendation; Description third bullet: edge-contact message to controller · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detail	Supervised obstacle-sensing transmitter described for Linear access-control systems serving motorized gates, doors or barriers. Denco supplier reference: RC DNT00068h1; span.sku; Description first bullet: stated application and supervision; Description second bullet: optional .001 UF capacitor/Miller recommendation; Description third bullet: edge-contact message to controller · checked 2026-09-12 · Denco
Supplier-stated detail	The source describes an edge-contact message to the controller and recommends a Miller gate-edge sensor with an optional 0.001 µF capacitor for full-featured compatibility. Denco supplier reference: RC DNT00068h1; span.sku; Description first bullet: stated application and supervision; Description second bullet: optional .001 UF capacitor/Miller recommendation; Description third bullet: edge-contact message to controller · checked 2026-09-12 · Denco
Selection limitation	The capacitor is optional, not a mandatory adapter. No exact sensor or controller is named; the source does not establish every Linear opener, complete-system certification or a guaranteed installed response. Denco supplier reference: RC DNT00068h1; span.sku; Description first bullet: stated application and supervision; Description second bullet: optional .001 UF capacitor/Miller recommendation; Description third bullet: edge-contact message to controller · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Linear official support before selecting a component.

Direct replacement paths

No direct successor for MGT-1 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: MGT-1 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: RC DNT00068Denco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Linear official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.