Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Linear / Independent reference

Linear accessories

Browse exact identifiers, documented model scope and source-backed compatibility conditions.

40 published referencesRead each page for its market and source date
  • 214829

    Linear 214829

    Linear 214829: The supplier identifies this replacement visor clip as Linear #214829.

  • ACT-21B

    Linear ACT-21B

    Linear ACT-21B: Miniature Linear custom block-coded MegaCode transmitter described for one device.

  • ACT-22B

    Linear ACT-22B

    Linear ACT-22B: Miniature Linear custom block-coded MegaCode transmitter with two buttons and three channels.

  • ACT-31B

    Linear ACT-31B key-ring radio control

    ACT-31B is a MegaCode key-ring control with one physical button and factory coding. No proximity-tag function is established in this reference. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-31C

    Linear ACT-31C key-ring radio control

    ACT-31C is a MegaCode key-ring control with one physical button and custom coding. No proximity-tag function is established in this reference. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-31D

    Linear ACT-31D key-ring radio control

    ACT-31D is a MegaCode key-ring control with one physical button and factory coding. It also has a Linear-format proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-31DH

    Linear ACT-31DH key-ring radio control

    ACT-31DH is a MegaCode key-ring control with one physical button and factory coding. It also has an HID-compatible proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-31DHC

    Linear ACT-31DHC key-ring radio control

    ACT-31DHC is a MegaCode key-ring control with one physical button and custom coding. It also has an HID-compatible proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-34B

    Linear ACT-34B key-ring radio control

    ACT-34B is a MegaCode key-ring control with four physical buttons and factory coding. No proximity-tag function is established in this reference. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-34C

    Linear ACT-34C key-ring radio control

    ACT-34C is a MegaCode key-ring control with four physical buttons and custom coding. No proximity-tag function is established in this reference. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-34D

    Linear ACT-34D key-ring radio control

    ACT-34D is a MegaCode key-ring control with four physical buttons and factory coding. It also has a Linear-format proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-34DH

    Linear ACT-34DH key-ring radio control

    ACT-34DH is a MegaCode key-ring control with four physical buttons and factory coding. It also has an HID-compatible proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • ACT-34DHC

    Linear ACT-34DHC key-ring radio control

    ACT-34DHC is a MegaCode key-ring control with four physical buttons and custom coding. It also has an HID-compatible proximity tag. The listed operator and receiver pairings cover radio control only; retain the exact variant and code-enrollment requirements.

  • DR

    Linear DR

    Linear DR: Linear single-channel receiver for one device, with 24 V AC/DC input, 310 MHz operation and eight DIP switches.

  • DT-2A

    Linear DT-2A

    Linear DT-2A: Two-button transmitter described for two Delta-3 receivers, operating at 310 MHz with eight DIP switches.

  • DT-4A

    Linear DT-4A

    Linear DT-4A: Four-button transmitter with listed arrangements of one four-channel DR4 receiver, two two-channel DR2 receivers, or four single-channel DR, DRQ or DRM receivers.

  • DT

    Linear DT

    Linear DT: One-button transmitter described for one Linear Delta3 receiver, with 310 MHz operation and eight DIP switches.

  • DT3+1

    Linear DT3+1

    Linear DT3+1: Handheld four-channel Common Gate Access transmitter with a three-channel section and a separate one-channel section.

  • DTG

    Linear DTG

    Linear DTG: DTG is described as an edge transmitter associated with the Delta-3 family.

  • DTKP

    Linear DTKP

    Linear DTKP: Backlit wireless keypad described as activating multiple Delta-3 receivers, with 256 available codes.

  • DX-12

    Linear DX-12

    Linear DX-12: Single-channel Linear receiver in a metal enclosure, with supply alternatives of 11–24 VDC or 12–16 VAC.

  • HAE00001

    Linear HAE00001 wall station

    HAE00001 is a wall station listed for LDCO800, LDCO801 in the cited revision. Match the complete identifier and source scope; availability and installation suitability are not established.

  • HAE00080

    Linear HAE00080 wi-fi wall station

    HAE00080 is a wi-fi wall station listed for LDCO841, LDCO850, LDCO852 in the cited revision. Match the complete identifier and source scope; availability and installation suitability are not established.

  • MDR

    Linear MDR radio receiver

    MDR identifies a radio receiver. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

  • MDR-1

    Linear MDR-1 radio receiver

    Identify MDR-1 as the exact receiver named in the Linear ACT chart and compare its documented radio-control pairings. Connected opener or gate compatibility requires separate evidence.

  • MDR-2

    Linear MDR-2 radio receiver

    MDR-2 identifies a radio receiver. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

  • MDR/U

    Linear MDR/U plug-in radio receiver

    MDR/U identifies a plug-in radio receiver. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

  • MDRG

    Linear MDRG radio receiver

    MDRG identifies a radio receiver. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

  • MDT-1A

    Linear MDT-1A

    Linear MDT-1A: Linear MegaCode transmitter with one button for one device.

  • MDT-1B

    Linear MDT-1B

    Linear MDT-1B: Linear custom block-coded MegaCode transmitter with one button for one device.

  • MDT-2A

    Linear MDT-2A

    Linear MDT-2A: Linear MegaCode transmitter with two buttons for two devices.

  • MDT-2B

    Linear MDT-2B

    Linear MDT-2B: Linear custom block-coded MegaCode transmitter with two buttons for two devices.

  • MDT-4A

    Linear MDT-4A

    Linear MDT-4A: Linear MegaCode transmitter with four buttons for four devices.

  • MDT-4B

    Linear MDT-4B

    Linear MDT-4B: Linear custom block-coded MegaCode transmitter with four buttons for four devices.

  • MDTK

    Linear MDTK wireless keypad

    MDTK identifies a wireless keypad. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

  • MGR

    Linear MGR radio receiver

    Identify MGR as the exact receiver named in the Linear ACT chart and compare its documented radio-control pairings. Connected opener or gate compatibility requires separate evidence.

  • MGR-2

    Linear MGR-2 radio receiver

    Identify MGR-2 as the exact receiver named in the Linear ACT chart and compare its documented radio-control pairings. Connected opener or gate compatibility requires separate evidence.

  • MGT-1

    Linear MGT-1

    Linear MGT-1: Supervised obstacle-sensing transmitter described for Linear access-control systems serving motorized gates, doors or barriers.

  • MTS3

    Linear MTS3 visor remote

    Identify the three-button MTS3 visor remote and its DNT00093 order number. The 861-linked Rev-B manual names MTS3 as its supplied remote; compare the exact edition and installed model. Other remotes and receiver pairings remain distinct.

  • SMDRG

    Linear SMDRG radio receiver

    SMDRG identifies a radio receiver. The cited source supports only the exact facts and relationships shown; other equipment pairings remain unverified.

Need a different number?

Use the exact-number and compatibility lookup →

Find an equipment model guide →

Official guidance

Visit Linear official support and compare the complete part number, equipment model, market and production details.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.