Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Linear / Accessory reference

Linear DR

Linear DR: Linear single-channel receiver for one device, with 24 V AC/DC input, 310 MHz operation and eight DIP switches.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Manufacturer identifier: DR. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detailLinear single-channel receiver for one device, with 24 V AC/DC input, 310 MHz operation and eight DIP switches.
Selection limitationThe 24 V rating is not the 12–24 V range of the separate GRD listings. Exact transmitter/opener pairings, relay ratings and code configuration are not supplied.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
DT-4A

Documented compatibility

From DT-4A to DR.

Denco names DT-4A in the stated application with DR. This is a described four-channel arrangement, not evidence that fewer receivers cannot operate fewer channels. No exact commercial-door operator or safety-system certification is stated.

Applies only within this source scope
  • Market: US
  • documented-configuration: Four single-channel receivers chosen from DR, DRQ or DRM
  • Denco supplier statement for the US reference catalog; confirm the installed equipment and required functions. This is not a physical fitment test.
  • This is a described four-channel arrangement, not evidence that fewer receivers cannot operate fewer channels. No exact commercial-door operator or safety-system certification is stated.
  • Denco supplier reference: RC DNT00027Bh1; span.sku; Description first bullet: exact receiver identities and one/two/four configurations; Description second commercial-control bullet · checked 2026-09-12 · Denco
DC-DT1

Documented compatibility

From DC-DT1 to DR.

Denco group scope and separately reviewed membership associate DC-DT1 with DR for the stated function.

Applies only within this source scope
  • Market: US
  • connection-purpose: Delta 3 transmitter-to-receiver radio operation.
  • dip-switch-settings: Matching transmitter and receiver DIP-switch settings
  • Bounded Denco supplier group association; verify the stated configuration. No physical or human engineering certification.
  • The transmitter source requires matching DIP settings. Exact receiver configuration, exclusions and downstream opener suitability still require confirmation.
DC-MT

Documented compatibility

From DC-MT to DR.

Denco group scope and separately reviewed membership associate DC-MT with DR for the stated function.

Applies only within this source scope
  • Market: US
  • connection-purpose: Delta 3 transmitter-to-receiver radio operation.
  • dip-switch-settings: Matching transmitter and receiver DIP-switch settings
  • Bounded Denco supplier group association; verify the stated configuration. No physical or human engineering certification.
  • The transmitter source requires matching DIP settings. Exact receiver configuration, exclusions and downstream opener suitability still require confirmation.
DTG

Documented compatibility

From DTG to DR.

Denco group scope and separately reviewed membership associate DTG with DR for the stated function.

Applies only within this source scope
  • Market: US
  • connection-purpose: Delta-3 radio-system association for the DTG edge transmitter.
  • Bounded Denco supplier group association; verify the stated configuration. No physical or human engineering certification.
  • This is not complete monitored entrapment-protection compatibility or a safety certification. Exact sensor, receiver, operator, monitoring and installation suitability remain unverified.
DC-DT2

Documented compatibility

From DC-DT2 to DR.

Denco group scope and separately reviewed membership associate DC-DT2 with DR for the stated function.

Applies only within this source scope
  • Market: US
  • connection-purpose: Delta 3 transmitter-to-receiver radio operation.
  • dip-switch-settings: Matching transmitter and receiver DIP-switch settings
  • Bounded Denco supplier group association; verify the stated configuration. No physical or human engineering certification.
  • The transmitter source requires matching DIP settings. Exact receiver configuration, exclusions and downstream opener suitability still require confirmation.

Direct replacement paths

No direct successor for DR is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: DR · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Denco Delta3 category: exact receiver membershipDenco · US · checked 2026-09-12
  2. Denco supplier reference: RC DNR00001Denco · US · checked 2026-09-12
  3. Denco supplier reference: RC DNT00072Denco · US · checked 2026-09-12
  4. Denco supplier reference: RC DNT00027BDenco · US · checked 2026-09-12
  5. Denco supplier reference: RC DC-DT1Denco · US · checked 2026-09-12
  6. Denco supplier reference: RC DC-DT2Denco · US · checked 2026-09-12
  7. Denco supplier reference: RC DC-MTDenco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Linear official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability