Digi-Code / Accessory reference

Digi-Code DC-DT1

Digi-Code DC-DT1: DC-DT1 is described as a 310 MHz visor transmitter with 1 channel.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Manufacturer identifier: DC-DT1. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier-stated detail	DC-DT1 is described as a 310 MHz visor transmitter with 1 channel. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco
Supplier-stated detail	The supplier states support for all Linear Delta 3 receivers when the DIP-switch settings match. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco
Supplier-stated detail	A 9-volt Eveready battery, visor clip and instructions are included; dimensions are 3 3/4 by 2 1/2 by 7/8 inches. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco
Supplier-stated detail	One bank of eight DIP switches supplies 256 possible codes. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco
Selection limitation	Matching DIP settings and independently identified Delta 3 receiver membership are required. The 256 combinations describe code space, not enrolled transmitters; exact installed-opener suitability remains separate. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationship	Evidence and conditions
DR Documented compatibility From DC-DT1 to DR.	Conditional Additional source conditions or an adapter must be checked before confirming compatibility. Details still needed connection-purpose dip-switch-settings source conditions Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified. Denco group scope and separately reviewed membership associate DC-DT1 with DR for the stated function. Applies only within this source scope Market: US connection-purpose: Delta 3 transmitter-to-receiver radio operation. dip-switch-settings: Matching transmitter and receiver DIP-switch settings Bounded Denco supplier group association; verify the stated configuration. No physical or human engineering certification. The transmitter source requires matching DIP settings. Exact receiver configuration, exclusions and downstream opener suitability still require confirmation. Denco supplier reference: RC DC-DT1Product h1 and span.sku; Description: all-Delta-3 receiver scope, matching-switch condition and per-channel configuration · checked 2026-09-12 · Denco Denco supplier reference: RC DNR00001h1; span.sku; Description three bullets: device count, voltage and frequency/switch count · checked 2026-09-12 · Denco Denco Delta3 category: exact receiver membershipDelta3 heading; exact product card 3, title, supplier SKU and detail link · checked 2026-09-12 · Denco

Direct replacement paths

No direct successor for DC-DT1 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: DC-DT1 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco Delta3 category: exact receiver membershipDenco · US · checked 2026-09-12
Denco supplier reference: RC DNR00001Denco · US · checked 2026-09-12
Denco supplier reference: RC DC-DT1Denco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

A direct support link for this brand has not been verified. Consult the named source for this reference.

Use Denco source reference and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.