Miller Edge / Accessory reference

Miller Edge AW14-RF-K10: Wireless air-wave system

AW14-RF-K10: Wireless air-wave system

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: AW14-RF-K10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Named components · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Door scope · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 2: Radio · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 2: Temperature · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Selection boundary · checked 2026-09-14 · AW14RF_20210101 · Miller Edge

Values apply to the exact identifier and scope in the cited source.
Named components	The system is explicitly identified as AW14-RF transmitter plus MRF-01 receiver. AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Named components · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
Door scope	Air-wave sensing-edge system for motorized doors; the sheet identifies it as non-monitored and discusses door operators made before August 2010. AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Door scope · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
Radio	915 MHz; nominal range 50 feet, maximum 100 feet under optimal conditions. AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 2: Radio · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
Temperature	+14 to +158 degrees F (-10 to +70 degrees C). AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 2: Temperature · checked 2026-09-14 · AW14RF_20210101 · Miller Edge
Selection boundary	Confirm the exact door, edge configuration and installed control requirements with the manufacturer. A non-monitored component does not replace monitoring required by the installed system. AW14-RF-K10 wireless air-wave edge systemAW14RF_20210101, PDF page 1: Selection boundary · checked 2026-09-14 · AW14RF_20210101 · Miller Edge

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.

Direct replacement paths

No direct successor for AW14-RF-K10 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: AW14-RF-K10 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

AW14-RF-K10 wireless air-wave edge systemMiller Edge · US · checked 2026-09-14 · AW14RF_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.