Miller Edge / Independent reference
Miller Edge accessories
Browse exact identifiers, documented model scope and source-backed compatibility conditions.
- AW10
Miller Edge AW10: Bare air-wave switch
AW10: Bare air-wave switch
- AW12A
Miller Edge AW12A: Air-wave switch in polycarbonate enclosure
AW12A: Air-wave switch in polycarbonate enclosure
- AW14
Miller Edge AW14: Air-wave switch in ABS enclosure
AW14: Air-wave switch in ABS enclosure
- AW14-RF
Miller Edge AW14-RF: Air-wave transmitter switch
AW14-RF: Air-wave transmitter switch
- AW14-RF-K10
Miller Edge AW14-RF-K10: Wireless air-wave system
AW14-RF-K10: Wireless air-wave system
- AW14K500-12
Miller Edge AW14K500-12: Wired air-wave hose kit
This wired kit lists a 12-foot gum-rubber hose with a 1/2-inch internal diameter and has no coil cord listed for this exact option. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- AW14K500-12-RF
Miller Edge AW14K500-12-RF: Wireless air-wave hose kit, 12 feet
This wireless kit lists a 12-foot, 1/2-inch hose and includes the AW14-RF-K10 system, an end plug and a connector plug. The non-monitored system does not replace monitoring required by the door operator.
- AW14K500-12C
Miller Edge AW14K500-12C: Wired air-wave hose kit with coil cord
This wired kit lists a 12-foot gum-rubber hose with a 1/2-inch internal diameter and includes a 12-foot coil cord. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- AW14K500-18
Miller Edge AW14K500-18: Wired air-wave hose kit
This wired kit lists an 18-foot gum-rubber hose with a 1/2-inch internal diameter and has no coil cord listed for this exact option. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- AW14K500-18-RF
Miller Edge AW14K500-18-RF: Wireless air-wave hose kit, 18 feet
This wireless kit lists an 18-foot, 1/2-inch hose and includes the AW14-RF-K10 system, an end plug and a connector plug. The non-monitored system does not replace monitoring required by the door operator.
- AW14K500-18C
Miller Edge AW14K500-18C: Wired air-wave hose kit with coil cord
This wired kit lists an 18-foot gum-rubber hose with a 1/2-inch internal diameter and includes a 12-foot coil cord. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- AW14K500-24
Miller Edge AW14K500-24: Wired air-wave hose kit
This wired kit lists a 24-foot gum-rubber hose with a 1/2-inch internal diameter and has no coil cord listed for this exact option. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- AW14K500-24-RF
Miller Edge AW14K500-24-RF: Wireless air-wave hose kit, 24 feet
This wireless kit lists a 24-foot, 1/2-inch hose and includes the AW14-RF-K10 system, an end plug and a connector plug. The non-monitored system does not replace monitoring required by the door operator.
- AW14K500-24C
Miller Edge AW14K500-24C: Wired air-wave hose kit with coil cord
This wired kit lists a 24-foot gum-rubber hose with a 1/2-inch internal diameter and includes a 12-foot coil cord. The kit footnote includes AW14 with silicone hose; exact door and control requirements still need confirmation.
- Clima-GUARD
Miller Edge Clima-GUARD: Sensing-edge profile and configuration selection
Clima-GUARD combines an ME112 sensing edge, an LS-0107 loop seal and a double-slot channel for the door arrangements described by Miller Edge. Its overall assembly dimensions differ from the ME112 component dimensions. Air-Wave availability remains unresolved in the cited configuration list.
- CPT210
Miller Edge CPT210: Sensing-edge profile and configuration selection
CPT210 is a field-configurable single-T sensing-edge profile for the rolling counter shutters and grilles described in its specification. Bulk extrusion, edge kits and end kits are distinct purchasing forms. Its documented end-kit choices are two-wire configurations; the sheet does not list a four-wire option.
- CPT215
Miller Edge CPT215: Sensing-edge profile and configuration selection
CPT215 is a field-configurable double-T sensing-edge profile for the two-inch surface application described by Miller Edge. The listed end-kit choices are two-wire configurations. Both document headings identify CPT215, while the footer says CPT210; that discrepancy does not make the profiles interchangeable.
- CPT223
Miller Edge CPT223: double-T sensing-edge configuration and channel selection
CPT223: double-T sensing-edge configuration and channel selection
- EIM-101
Miller Edge EIM-101: Non-monitored CPT edge interface module
EIM-101: Non-monitored CPT edge interface module
- FSC-57-115VAC
Miller Edge FSC-57-115VAC: Enclosed sensing-edge relay controller
This 115 V AC FSC-57 package encloses an RT6 controller in a steel NEMA 13 housing with two LEDs and a reset button. The enclosure dimensions remain inconsistent between the source's inch and millimeter figures.
- FSC-57-24VDC
Miller Edge FSC-57-24VDC: Enclosed sensing-edge relay controller
This FSC-57 package encloses the RT6 controller in a steel NEMA 13 housing. The model and feature list specify 24 V DC, while the power table also lists AC; AC acceptance remains unresolved.
- FSIS-35P-4
Miller Edge FSIS-35P-4: Isolating relay controller for specified sensing-edge applications
FSIS-35P-4: Isolating relay controller for specified sensing-edge applications
- LC-K36
Miller Edge LC-K36: Non-monitored light curtain with 36-inch protection height
LC-K36: Non-monitored light curtain with 36-inch protection height
- LC-K72
Miller Edge LC-K72: Non-monitored light curtain with 72-inch protection height
LC-K72: Non-monitored light curtain with 72-inch protection height
- LED-ARIES-ME123C-K10
Miller Edge LED-ARIES-ME123C-K10: Dual-sided sectional-door LED system, K10 size
Aries K10 is listed for sectional-door sections 10 ft 3 in to 12 ft 2 in wide, with a 10 ft 2 in LED strip. It provides a visual door-status signal; the edge or loop seal is sold separately.
- LED-ARIES-ME123C-K12
Miller Edge LED-ARIES-ME123C-K12: Dual-sided sectional-door LED system, K12 size
Aries K12 is listed for sectional-door sections 12 ft 3 in to 14 ft 2 in wide, with an 11 ft 9 in LED strip. It provides a visual door-status signal; the edge or loop seal is sold separately.
- LED-ARIES-ME123C-K14
Miller Edge LED-ARIES-ME123C-K14: Dual-sided sectional-door LED system, K14 size
Aries K14 is listed for sectional-door sections 14 ft 3 in to 20 ft 2 in wide, with a 14 ft 1 in LED strip. It provides a visual door-status signal; the edge or loop seal is sold separately.
- LED-ARIES-ME123C-K8
Miller Edge LED-ARIES-ME123C-K8: Dual-sided sectional-door LED system, K8 size
Aries K8 is listed for sectional-door sections 8 ft 0 in to 10 ft 2 in wide, with a 7 ft 6 in LED strip. It provides a visual door-status signal; the edge or loop seal is sold separately.
- LED-ORION-24-K10
Miller Edge LED-ORION-24-K10: Interior door LED system, K10 size
Orion K10 lists a 10 ft 2 in LED strip for sectional-door sections 10 ft 3 in to 12 ft 2 in wide or rolling-steel openings 10 ft 8 in to 12 ft 7 in wide. Select by the correct door-width reference; this is a visual alert accessory.
- LED-ORION-24-K12
Miller Edge LED-ORION-24-K12: Interior door LED system, K12 size
Orion K12 lists an 11 ft 9 in LED strip for sectional-door sections 12 ft 3 in to 14 ft 2 in wide or rolling-steel openings 12 ft 8 in to 14 ft 7 in wide. Select by the correct door-width reference; this is a visual alert accessory.
- LED-ORION-24-K14
Miller Edge LED-ORION-24-K14: Interior door LED system, K14 size
Orion K14 lists a 14 ft 1 in LED strip. The listed width ranges are 14 ft 3 in and wider for sectional-door sections, and 14 ft 8 in and wider for rolling-steel openings. This is a visual alert accessory.
- LED-ORION-24-K8
Miller Edge LED-ORION-24-K8: Interior door LED system, K8 size
Orion K8 lists a 7 ft 6 in LED strip for sectional-door sections 8 ft 0 in to 10 ft 2 in wide or rolling-steel openings 8 ft 8 in to 10 ft 7 in wide. Select by the correct door-width reference; this is a visual alert accessory.
- LED-PHXRS-K8
Miller Edge LED-PHXRS-K8: Motion-activated LED kit for rolling-steel doors
LED-PHXRS-K8: Motion-activated LED kit for rolling-steel doors
- LED-PHXSD-K8
Miller Edge LED-PHXSD-K8: Motion-activated LED kit for sectional doors
LED-PHXSD-K8: Motion-activated LED kit for sectional doors
- MC22
Miller Edge MC22: Sensing-edge profile and configuration selection
MC22 is a reinforced T-mount sensing-edge profile described for commercial sectional and rolling doors and rolling grilles. The February 2026 brochure and May 2026 specification disagree on profile height and mounting-channel number. The current supplied profile and channel remain unverified; retain the separate source dimensions when identifying the assembly.
- MC22-C7
Miller Edge MC22-C7: rolling-door channel identification and unresolved kit numbers
MC22-C7: rolling-door channel identification and unresolved kit numbers
- ME110
Miller Edge ME110: Sensing-edge profile and configuration selection
ME110 is a single-T slide-in sensing-edge profile for the rolling counter shutters and grilles described by Miller Edge, with a 7/8-inch-wide, 3/4-inch-high body. Its 50-foot maximum electric-edge length and 30-foot Air-Wave limit apply to different configurations. Shared channels with ME111 do not establish replacement equivalence.
- ME111
Miller Edge ME111: Sensing-edge profile and configuration selection
ME111 is a taller slide-in sensing-edge profile for rolling counter shutters and grilles, including uneven counter or floor surfaces. Its 7/8-inch-wide, 1-1/2-inch-high body differs from ME110 despite the shared channel family. Confirm the required length, outlet and electrical configuration for the complete edge.
- ME112
Miller Edge ME112: Sensing-edge profile and configuration selection
ME112 is a double-T slide-in sensing-edge profile for the commercial sectional-door arrangement described with a 1-3/8-inch surface and accepting bottom bar. The ME112 component and the Clima-GUARD assembly have different dimensions. Air-Wave and pneumatic availability remain unresolved: the length row mentions options absent from the configuration list.
- ME113
Miller Edge ME113: Sensing-edge profile and configuration selection
ME113 is a double-T slide-in sensing-edge profile for the 1-1/2-inch sectional-door surface application described by Miller Edge. Its sensing body is 1-1/2 inches wide and 1-9/16 inches high. Select the channel, length, outlet and electrical configuration separately; the optional universal plug and coil cord are not established as standard inclusions.
- ME116
Miller Edge ME116: Sensing-edge profile and configuration selection
ME116 is a double-T sensing-edge profile for a commercial sectional door with the described 1-3/4-inch surface and accepting bottom retainer. The specification lists no separate numbered mounting channel. Its mounting geometry differs from the single-T ME117 profile, so a similar number does not establish the same installation.
- ME117
Miller Edge ME117: Sensing-edge profile and configuration selection
ME117 is a single-T sensing-edge profile with an added lower pocket for uneven surfaces, described for sectional doors 1 to 2 inches thick. It has a 1-7/8-inch-wide, 2-inch-high body and an optional ME117-C7 channel. Its profile and mounting arrangement differ from ME116 and ME123.
- ME120
Miller Edge ME120: Sensing-edge profile and configuration selection
ME120 is a single-T sensing-edge profile for the rolling shutters and motorized-door uses described by Miller Edge, with ME120-PC and ME120-C channel choices. Its height is unresolved across sources: the 2020 specification shows 1-11/16 inches, while the February 2026 brochure shows 1-15/16 inches. Confirm the supplied profile before using either value for clearance.
- ME123
Miller Edge ME123: Sensing-edge profile and configuration selection
ME123 is a double-T slide-in sensing-edge profile for the two-inch surface application described for sectional and horizontal sliding doors. Its six named channel options also appear for CPT215, but the profile dimensions, maximum electric-edge length and configuration choices differ. ME123-U remains a separately mentioned identifier, with no replacement equivalence established.
- ME190
Miller Edge ME190: vehicle treadle and external-switch selection
ME190: vehicle treadle and external-switch selection
- MEL-II-K10
Miller Edge MEL-II-K10: Monitored door-edge wireless system
MEL-II-K10 combines the 916 MHz MEL-II-RX10 receiver and MEL-II-TX10 transmitter for a 10K monitored edge input. Its transmitter uses two AA 3.6 V lithium cells; MEL-K20 is a separate generation.
- MEL-II-RX10
Miller Edge MEL-II-RX10: Monitored Edge Link-II receiver
This 916 MHz receiver is named with MEL-II-TX10 in the MEL-II-K10 system. It uses nominal 12-24 V AC/DC and lists 10K, pulsed and normally open outputs; select the output required by the exact operator.
- MEL-II-TX10
Miller Edge MEL-II-TX10: Monitored Edge Link-II transmitter
This 916 MHz transmitter accepts a 10K monitored edge input and is named with MEL-II-RX10 in MEL-II-K10. It requires two AA 3.6 V lithium cells; AA size alone does not identify a suitable battery.
- MEL-K20
Miller Edge MEL-K20: Earlier Monitored Edge Link system
The 2015 MEL-K20 sheet names a 315 MHz system combining MEL-TX20 and MEL-RX20, with T2 (10K) monitored edge input scope. Its transmitter uses two AA 1.5 V lithium cells; the later MEL-II system is a separate generation.
- MEL-RX20
Miller Edge MEL-RX20: Earlier Monitored Edge Link receiver
This 315 MHz receiver is named with MEL-TX20 in the 2015 MEL-K20 sheet. It uses nominal 12-24 V AC/DC and lists a photo-eye pulse stream plus separate SPDT contacts for safety edge, knock-out and low battery.
- MEL-TX20
Miller Edge MEL-TX20: Earlier Monitored Edge Link transmitter
This 315 MHz transmitter is named with MEL-RX20 in the 2015 MEL-K20 sheet and uses two AA 1.5 V lithium cells. Its system has T2 (10K) monitored edge input scope; MEL-II and RBand cross-pairings remain unverified.
- MET-101
Miller Edge MET-101: Electric sensing-edge identification tester
MET-101: Electric sensing-edge identification tester
- MIRCU-02
Miller Edge MIRCU-02: Photo-optic interface with non-monitored output
MIRCU-02: Photo-optic interface with non-monitored output
- MIRF-S2
Miller Edge MIRF-S2: Rebel non-monitored photo-eye system, 30-foot class
MIRF-S2: Rebel non-monitored photo-eye system, 30-foot class
- MIRF-S2-50
Miller Edge MIRF-S2-50: Rebel non-monitored photo-eye system, 50-foot class
MIRF-S2-50: Rebel non-monitored photo-eye system, 50-foot class
- MIRF-T2
Miller Edge MIRF-T2: Patriot-2 Telescopic non-monitored photo-eye system, 30-foot class
MIRF-T2: Patriot-2 Telescopic non-monitored photo-eye system, 30-foot class
- MIRF-T2-50
Miller Edge MIRF-T2-50: Patriot-2 Telescopic non-monitored photo-eye system, 50-foot class
MIRF-T2-50: Patriot-2 Telescopic non-monitored photo-eye system, 50-foot class
- MIRF-Z2
Miller Edge MIRF-Z2: Patriot-2 Z-Flap non-monitored photo-eye system, 30-foot class
MIRF-Z2: Patriot-2 Z-Flap non-monitored photo-eye system, 30-foot class
- MIRF-Z2-50
Miller Edge MIRF-Z2-50: Patriot-2 Z-Flap non-monitored photo-eye system, 50-foot class
MIRF-Z2-50: Patriot-2 Z-Flap non-monitored photo-eye system, 50-foot class
- MIRM-S2
Miller Edge MIRM-S2: Rebel monitored photo-eye system, 30-foot class
MIRM-S2: Rebel monitored photo-eye system, 30-foot class
- MIRM-S2-50
Miller Edge MIRM-S2-50: Rebel monitored photo-eye system, 50-foot class
MIRM-S2-50: Rebel monitored photo-eye system, 50-foot class
- MIRM-T2
Miller Edge MIRM-T2: Patriot-2 Telescopic monitored photo-eye system, 30-foot class
MIRM-T2: Patriot-2 Telescopic monitored photo-eye system, 30-foot class
- MIRM-T2-50
Miller Edge MIRM-T2-50: Patriot-2 Telescopic monitored photo-eye system, 50-foot class
MIRM-T2-50: Patriot-2 Telescopic monitored photo-eye system, 50-foot class
- MIRM-Z2
Miller Edge MIRM-Z2: Patriot-2 Z-Flap monitored photo-eye system, 30-foot class
MIRM-Z2: Patriot-2 Z-Flap monitored photo-eye system, 30-foot class
- MIRM-Z2-50
Miller Edge MIRM-Z2-50: Patriot-2 Z-Flap monitored photo-eye system, 50-foot class
MIRM-Z2-50: Patriot-2 Z-Flap monitored photo-eye system, 50-foot class
- MLC-K36
Miller Edge MLC-K36: Monitored light curtain with 36-inch protection height
MLC-K36: Monitored light curtain with 36-inch protection height
- MLC-K36-DUO
Miller Edge MLC-K36-DUO: Dual-output light curtain with 36-inch protection height
MLC-K36-DUO: Dual-output light curtain with 36-inch protection height
- MLC-K72
Miller Edge MLC-K72: Monitored light curtain with 72-inch protection height
MLC-K72: Monitored light curtain with 72-inch protection height
- MLC-K72-DUO
Miller Edge MLC-K72-DUO: Dual-output light curtain with 72-inch protection height
MLC-K72-DUO: Dual-output light curtain with 72-inch protection height
- MRF-01
Miller Edge MRF-01: Receiver for explicitly named pneumatic and air-wave systems
MRF-01 is named as the receiver in AW14-RF-K10 and PS20-RFK10 systems. The 2014 and 2021 sheets disagree on AC/DC supply limits and dimensions; confirm the exact receiver label and revision before selecting a supply.
- MT21
Miller Edge MT21: Sensing-edge profile and configuration selection
MT21 is a sensing-edge profile with a single top tab for mounting between the double-angle bottom bars of rolling steel and rolling fire doors. The profile name does not specify a complete configured edge: confirm the door assembly, length, outlet, monitoring and termination requirements.
- MT22
Miller Edge MT22: Sensing-edge profile and configuration selection
MT22 is a sensing-edge profile with a nominal 2-by-2-inch body and one top tab for the double-angle bottom bars of rolling steel and rolling fire doors. MU22 has two mounting tabs despite the same nominal body size. The inconsistent tab-height conversion cannot establish mounting clearance; confirm the actual door assembly and configured edge.
- MT33
Miller Edge MT33: Sensing-edge profile and configuration selection
MT33 is a sensing-edge profile with a nominal 3-by-3-inch body and one top tab for the double-angle bottom bars of rolling steel and rolling fire doors. Its mounting arrangement differs from the two-tab MU33 profile. Confirm the actual door assembly, length, outlet, monitoring and termination for the complete configured edge.
- MU21
Miller Edge MU21: Sensing-edge profile and configuration selection
MU21 is a sensing-edge profile for commercial sectional doors with a two-inch mounting surface. Its two top tabs wrap around the door edge without a separate mounting channel in the described arrangement. Confirm the door assembly, length, outlet, monitoring and termination requirements for the complete configured edge.
- MU22
Miller Edge MU22: Sensing-edge profile and configuration selection
MU22 is a sensing-edge profile with a 2-by-2-inch sensing body and two top tabs for direct mounting on the described two-inch sectional-door surface. The body height excludes the tabs, and their inconsistent height conversion cannot establish clearance. Its mounting arrangement differs from the single-tab MT22 profile.
- MU33
Miller Edge MU33: Sensing-edge profile and configuration selection
MU33 is a sensing-edge profile with a 3-by-3-inch sensing body and two top tabs for the described three-inch surfaces on aircraft hangar and commercial sectional doors. Body height excludes the mounting tabs. MT33 uses a different, single-tab mounting arrangement; the shared body size does not establish interchangeability.
- MWAVE
Miller Edge MWAVE: Door-activation radar motion sensor
MWAVE: Door-activation radar motion sensor
- MWR12
Miller Edge MWR12: Single-channel non-monitored receiver
MWR12: Single-channel non-monitored receiver
- MWR12B
Miller Edge MWR12B: One-channel non-monitored wireless edge receiver
MWR12B: One-channel non-monitored wireless edge receiver
- MWR13
Miller Edge MWR13: Three-channel non-monitored receiver
MWR13: Three-channel non-monitored receiver
- MWR22B
Miller Edge MWR22B: Two-channel non-monitored wireless edge receiver
MWR22B: Two-channel non-monitored wireless edge receiver
- MWRT12
Miller Edge MWRT12: Single-channel sensing-edge radio system
MWRT12: Single-channel sensing-edge radio system
- MWRT12B
Miller Edge MWRT12B: Single-channel non-monitored system package
MWRT12B: Single-channel non-monitored system package
- MWRTA12
Miller Edge MWRTA12: Single-channel sensing-edge radio system
MWRTA12: Single-channel sensing-edge radio system
- MWRTA12B
Miller Edge MWRTA12B: Single-channel non-monitored system package with transmitter low-battery alarm
MWRTA12B: Single-channel non-monitored system package with transmitter low-battery alarm
- MWT12
Miller Edge MWT12: Sensing-edge transmitter
MWT12: Sensing-edge transmitter
- MWT12B
Miller Edge MWT12B: Non-monitored wireless edge transmitter without the listed audible battery alarm
MWT12B: Non-monitored wireless edge transmitter without the listed audible battery alarm
- MWTA12
Miller Edge MWTA12: Sensing-edge transmitter with low-battery alarm
MWTA12: Sensing-edge transmitter with low-battery alarm
- MWTA12B
Miller Edge MWTA12B: Non-monitored wireless edge transmitter with low-battery alarm
MWTA12B: Non-monitored wireless edge transmitter with low-battery alarm
- OG-T-K10
Miller Edge OG-T-K10: Thru-beam photo-eye system
OG-T-K10: Thru-beam photo-eye system
- OG-T-PKIT
Miller Edge OG-T-PKIT: Thru-beam photo-eye pulsed kit
OG-T-PKIT: Thru-beam photo-eye pulsed kit
- PE-CON-K10
Miller Edge PE-CON-K10: Photo-eye conduit enclosure accessory
PE-CON-K10: Photo-eye conduit enclosure accessory
- PS20-RF
Miller Edge PS20-RF: Pneumatic switch with embedded transmitter
PS20-RF: Pneumatic switch with embedded transmitter
- PS20-RFK10
Miller Edge PS20-RFK10: Named pneumatic transmitter-and-receiver kit
PS20-RFK10: Named pneumatic transmitter-and-receiver kit
- PS20A
Miller Edge PS20A: Wired pneumatic edge switch
PS20A: Wired pneumatic edge switch
- PS20K500-12
Miller Edge PS20K500-12: Wired pneumatic hose kit
This wired pneumatic kit lists 12 feet of 1/2-inch gum-rubber hose, 4 inches of hard-rubber hose, two end plugs and two wire nuts. No coil cord is listed for this option.
- PS20K500-12-RF
Miller Edge PS20K500-12-RF: Wireless pneumatic hose kit
This wireless pneumatic kit lists 12 feet of 1/2-inch hose, a switch with an embedded transmitter, a receiver and an end plug. The wireless kit table lists no coil cord.
- PS20K500-12C
Miller Edge PS20K500-12C: Wired pneumatic hose kit with coil cord
This C-suffix pneumatic kit lists 12 feet of 1/2-inch gum-rubber hose and a 12-foot coil cord. It also lists 4 inches of hard-rubber hose, two end plugs and two wire nuts.
- PS20K500-18
Miller Edge PS20K500-18: Wired pneumatic hose kit
This wired pneumatic kit lists 18 feet of 1/2-inch gum-rubber hose, 4 inches of hard-rubber hose, two end plugs and two wire nuts. No coil cord is listed for this option.
- PS20K500-18-RF
Miller Edge PS20K500-18-RF: Wireless pneumatic hose kit
This wireless pneumatic kit lists 18 feet of 1/2-inch hose, a switch with an embedded transmitter, a receiver and an end plug. The wireless kit table lists no coil cord.
- PS20K500-18C
Miller Edge PS20K500-18C: Wired pneumatic hose kit with coil cord
This C-suffix pneumatic kit lists 18 feet of 1/2-inch gum-rubber hose and a 12-foot coil cord. It also lists 4 inches of hard-rubber hose, two end plugs and two wire nuts.
- RB-G-K10C
Miller Edge RB-G-K10C: Two-channel monitored RBand system
RB-G-K10C: Two-channel monitored RBand system
- RB-P-K10C
Miller Edge RB-P-K10C: One-channel monitored RBand system for a T2 edge
RB-P-K10C: One-channel monitored RBand system for a T2 edge
- RB-P-K20
Miller Edge RB-P-K20: One-channel monitored RBand system for a T3 edge
RB-P-K20: One-channel monitored RBand system for a T3 edge
- RB-TX10C
Miller Edge RB-TX10C: RBand monitored sensing-edge transmitter
RB-TX10C: RBand monitored sensing-edge transmitter
- RB-TX20
Miller Edge RB-TX20: RBand monitored sensing-edge transmitter
RB-TX20: RBand monitored sensing-edge transmitter
- RLC-K36
Miller Edge RLC-K36: Relay-output light curtain with 36-inch protection height
RLC-K36: Relay-output light curtain with 36-inch protection height
- RLC-K72
Miller Edge RLC-K72: Relay-output light curtain with 72-inch protection height
RLC-K72: Relay-output light curtain with 72-inch protection height
- RT6-115VAC
Miller Edge RT6-115VAC: DIN-rail sensing-edge relay controller
This is the 115 V AC DIN-rail RT6 controller, separate from the FSC-57 enclosed package. The documented input group covers four-wire Miller Edge sensing edges, subject to the exact circuit and reset requirements.
- RT6-24VDC
Miller Edge RT6-24VDC: DIN-rail sensing-edge relay controller
This is the DIN-rail RT6 controller identified as 24 V DC, separate from the FSC-57 enclosed package. The power table also lists AC, so AC acceptance remains unresolved.
- SM-101
Miller Edge SM-101: Door-operator interface for a monitored diode-capacitor edge
SM-101: Door-operator interface for a monitored diode-capacitor edge
- SM-102
Miller Edge SM-102: Door-operator interface for a monitored 10K resistive edge
SM-102: Door-operator interface for a monitored 10K resistive edge
- TG-R-K10
Miller Edge TG-R-K10: Reflective photo-eye system
TG-R-K10: Reflective photo-eye system
- TG-R-NO-K10
Miller Edge TG-R-NO-K10: Reflective photo-eye system
TG-R-NO-K10: Reflective photo-eye system
- TG-R-PKIT
Miller Edge TG-R-PKIT: Reflective photo-eye pulsed kit
TG-R-PKIT: Reflective photo-eye pulsed kit
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.