Miller Edge / Accessory reference
Miller Edge PS20K500-18C: Wired pneumatic hose kit with coil cord
This C-suffix pneumatic kit lists 18 feet of 1/2-inch gum-rubber hose and a 12-foot coil cord. It also lists 4 inches of hard-rubber hose, two end plugs and two wire nuts.
Match the whole number.
Manufacturer identifier: PS20K500-18C. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- PS20A pneumatic switch and wired kit selectionPS20A_20210101, PDF page 2: Hose · checked 2026-09-14 · PS20A_20210101 · Miller Edge
- PS20A pneumatic switch and wired kit selectionPS20A_20210101, PDF page 2: Listed fittings · checked 2026-09-14 · PS20A_20210101 · Miller Edge
- PS20A pneumatic switch and wired kit selectionPS20A_20210101, PDF page 2: Coil cord · checked 2026-09-14 · PS20A_20210101 · Miller Edge
- PS20A pneumatic switch and wired kit selectionPS20A_20210101, PDF page 1: Selection boundary · checked 2026-09-14 · PS20A_20210101 · Miller Edge
| Hose | 18 feet of 1/2-inch gum-rubber hose plus 4 inches of hard-rubber hose.View source and citation details
|
|---|---|
| Listed fittings | Two end plugs and two wire nuts.View source and citation details
|
| Coil cord | Includes a 12-foot coil cord.View source and citation details
|
| Selection boundary | Confirm the exact door, edge configuration and installed control requirements with the manufacturer. A non-monitored component does not replace monitoring required by the installed system.View source and citation details
|
Compare pneumatic hose lengths and coil-cord options
Read the hose length and C suffix separately: both C options list a 12-foot coil cord, including the kit with 18 feet of hose. Each kit also lists 4 inches of hard-rubber hose, two end plugs and two wire nuts. No coil cord is listed for the plain options. These non-monitored kit references do not establish RF-system equivalence or exact installed-door suitability.
| Exact reference | Hose | Coil cord |
|---|---|---|
| PS20K500-12 | 12 feet of 1/2-inch gum-rubber hose plus 4 inches of hard-rubber hose. View source and citation details
| No coil cord listed for this option. View source and citation details
|
| PS20K500-12C | 12 feet of 1/2-inch gum-rubber hose plus 4 inches of hard-rubber hose. View source and citation details
| Includes a 12-foot coil cord. View source and citation details
|
| PS20K500-18 | 18 feet of 1/2-inch gum-rubber hose plus 4 inches of hard-rubber hose. View source and citation details
| No coil cord listed for this option. View source and citation details
|
| PS20K500-18C This reference | 18 feet of 1/2-inch gum-rubber hose plus 4 inches of hard-rubber hose. View source and citation details
| Includes a 12-foot coil cord. View source and citation details
|
A specification absent from one reference is not established by the other. Keep the exact identifier, configuration and cited revision when comparing.
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.
Direct replacement paths
No direct successor for PS20K500-18C is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
This reference has no documented compatible or incompatible pairing to check. Use the facts and source scope above to identify the item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- PS20A pneumatic switch and wired kit selectionMiller Edge · US · checked 2026-09-14 · PS20A_20210101
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.