Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge CPT223: double-T sensing-edge configuration and channel selection

CPT223: double-T sensing-edge configuration and channel selection

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: CPT223. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
ApplicationField-configurable double-T edge for motorized doors and 2-inch mounting surfaces. Confirm the supplied edge and mounting geometry.
Material and contactBlack flexible PVC exterior with conductive-polymer contact element.
Ordering lengthFinished edge: 1/4-inch ordering increments with +/-1/4-inch manufacturing tolerance. The 50-foot figure describes bulk extrusion; it is not a verified maximum finished monitored-edge length.
SensitivityNominal 7-12 lbf.
Lead and outlet18-inch SJTO 22-gauge lead with universal end plug.
Electrical limitMaximum 24 V AC/DC, 1/2 amp; normally open.
Monitored choices2-wire configurations with 6.8K, 8.2K, 10K or 270K resistor, .00001 MFD capacitor, or diode capacitor. The exact termination must match the control input.
Non-monitored choice2-wire non-monitored is listed separately; it does not substitute for a required monitored configuration.
Cross-sectionOverall width 1-11/16 inches (42 mm), height 1-5/8 inches (41 mm). The upper dimension is 1-9/16 inches (39 mm); the local T dimension is 1/4 inch (7 mm).
Temperature boundaryThe source gives no numeric operating-temperature range. Confirm application requirements with Miller Edge.
Listed mounting optionsME123-C, ME123-C1, ME123-C2175, ME123-C3 and ME123-C7 are high-density PVC; ME123-CA3 is brushed aluminum. Match the exact channel geometry before selection.
Selection boundaryCPT223 does not establish a configured edge from its family number alone. Match length, channel, outlet, termination and operator requirements. No Air-Wave or Pneumatic option is listed in this sheet.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
ME123-C

Documented compatibility

From CPT223 to ME123-C.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-C only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; high-density PVC describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.
ME123-C1

Documented compatibility

From CPT223 to ME123-C1.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-C1 only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; high-density PVC describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.
ME123-C2175

Documented compatibility

From CPT223 to ME123-C2175.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-C2175 only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; high-density PVC describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.
ME123-C3

Documented compatibility

From CPT223 to ME123-C3.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-C3 only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; high-density PVC describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.
ME123-C7

Documented compatibility

From CPT223 to ME123-C7.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-C7 only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; high-density PVC describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.
ME123-CA3

Documented compatibility

From CPT223 to ME123-CA3.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

CPT223 is named with ME123-CA3 only within the reviewed source conditions.

Applies only within this source scope
  • Market: US
  • configuration: Exact CPT223 mounting geometry
  • This is an optional mechanical channel listing for CPT223. Match the supplied profile and channel geometry; brushed aluminum describes the listed channel material.
  • Confirm length, electrical termination, operator input and current suitability with Miller Edge. No whole-door approval or reverse compatibility is established.

Direct replacement paths

No direct successor for CPT223 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: CPT223 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. CPT223 field-configurable sensing edgeMiller Edge · US · checked 2026-09-14 · CPT223_20220901

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability