Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge MEL-RX20: Earlier Monitored Edge Link receiver

MEL-RX20: Earlier Monitored Edge Link receiver

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: MEL-RX20. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Named system · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Radio and power · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Output identification · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Enclosure · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Selection boundary · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
Values apply to the exact identifier and scope in the cited source.
Named systemReceiver identified with MEL-TX20 in the MEL-K20 package.
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Named system · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
Radio and power315 MHz; nominal 12-24 V AC/DC.
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Radio and power · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
Output identificationPhoto-eye pulse stream; separate SPDT contacts for safety edge, knock-out and low battery.
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Output identification · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge
EnclosureAluminum receiver housing; the sheet supplies no enclosure protection rating for this receiver. Dimensions: 4.00 W x 4.75 H x 1.00 D inches.
Selection boundaryConfirm the exact installed operator and the MEL-TX20 transmitter. Do not infer compatibility from a legacy manufacture date or similar system name.
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Selection boundary · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
MEL-TX20

Documented compatibility

From MEL-TX20 to MEL-RX20.

MEL-TX20 and MEL-RX20 are explicitly identified as the MEL-K20 system components.

Applies only within this source scope
  • Market: US
  • configuration: T2 (10K) monitored sensing edge
  • Confirm the exact supplied configuration and the installed operator requirements. This component relationship is limited to the documented package, input or mechanical role; it does not approve a complete door safety system.
  • Monitored Edge Link MEL-K20MEL-K20_Spec_20150303, PDF page 1: Exact model or component pairing · checked 2026-09-14 · MEL-K20_Spec_20150303 · Miller Edge

Direct replacement paths

No direct successor for MEL-RX20 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: MEL-RX20 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Monitored Edge Link MEL-K20Miller Edge · US · checked 2026-09-14 · MEL-K20_Spec_20150303

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability