Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge PE-CON-K10: Photo-eye conduit enclosure accessory

PE-CON-K10: Photo-eye conduit enclosure accessory

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: PE-CON-K10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Documented photo-eye scopeThe sheet explicitly names TG-R-K10 and OG-T-K10 as compatible photo-optic systems.
Mechanical identificationIntegrated 3/4-inch type-C conduit body and a hood with swivel bracket.
Package exclusionsThe photo eye, conduit and fitting are not included.
MaterialsPolycarbonate hood/bracket assembly and aluminum conduit body/cap; black finish.
Printed dimensionsThe specification table lists 1-9/16 W x 4-11/16 H x 2 D inches and an 8-ounce weight.
Dimension conflictThe depth drawing pairs 2 inches with 15 mm, which are inconsistent. Confirm physical depth and clearance before selection; the metric label is not silently corrected.
Selection boundaryThis accessory relationship concerns the enclosure and mounting arrangement. It does not establish electrical monitoring or compatibility of an installed door operator.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
OG-T-K10

Documented compatibility

From PE-CON-K10 to OG-T-K10.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

PE-CON-K10 is explicitly named as an enclosure accessory for OG-T-K10.

Applies only within this source scope
  • Market: US
  • configuration: Mechanical enclosure selection
  • Confirm the exact supplied configuration and the installed operator requirements. This component relationship is limited to the documented package, input or mechanical role; it does not approve a complete door safety system.
TG-R-K10

Documented compatibility

From PE-CON-K10 to TG-R-K10.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • configuration
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

PE-CON-K10 is explicitly named as an enclosure accessory for TG-R-K10.

Applies only within this source scope
  • Market: US
  • configuration: Mechanical enclosure selection
  • Confirm the exact supplied configuration and the installed operator requirements. This component relationship is limited to the documented package, input or mechanical role; it does not approve a complete door safety system.

Direct replacement paths

No direct successor for PE-CON-K10 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: PE-CON-K10 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Photo Eye Conduit Enclosure Kit PE-CON-K10Miller Edge · US · checked 2026-09-14 · PE-CON_Spec_20240515

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability