Miller Edge / Accessory reference
Miller Edge OG-T-K10: Thru-beam photo-eye system
OG-T-K10: Thru-beam photo-eye system
Match the whole number.
Manufacturer identifier: OG-T-K10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- OptiGuard OG-T-K10OG-T_20230803, PDF page 1: Optical arrangement · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Exact output option · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Operating range · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Power and consumption · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Package identification · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Housing and cable · checked 2026-09-14 · OG-T_20230803 · Miller Edge
- OptiGuard OG-T-K10OG-T_20230803, PDF page 2: Selection boundary · checked 2026-09-14 · OG-T_20230803 · Miller Edge
| Optical arrangement | Separate emitter and receiver form a thru-beam pair.
|
|---|---|
| Exact output option | Normally closed and 10K. Preserve the complete suffix before selecting the operator interface.
|
| Operating range | 6-100 feet.
|
| Power and consumption | 12-40 V DC or 24-48 V AC; less than 40 mA listed consumption.
|
| Package identification | One emitter, one receiver and two mounting bracket/hood assemblies.
|
| Housing and cable | Emitter and receiver housing is listed as IP67, with 6-foot 20 AWG cable. The separate bracket is galvanized steel.
|
| Selection boundary | Confirm the exact operator and required monitoring output with Miller Edge. Output choices belong to the individual model; no family-wide electrical interchangeability or named-opener fitment is established.
|
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.
| Equipment or component / relationship | Evidence and conditions |
|---|---|
| PE-CON-K10 Documented compatibility From PE-CON-K10 to OG-T-K10. | PE-CON-K10 is explicitly named as an enclosure accessory for OG-T-K10. Applies only within this source scope
|
Direct replacement paths
No direct successor for OG-T-K10 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
Compare exact equipment or a component.
Check a part or accessory pairing
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- OptiGuard OG-T-K10Miller Edge · US · checked 2026-09-14 · OG-T_20230803
- Photo Eye Conduit Enclosure Kit PE-CON-K10Miller Edge · US · checked 2026-09-14 · PE-CON_Spec_20240515
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.