Miller Edge / Accessory reference

Miller Edge PS20-RFK10: Named pneumatic transmitter-and-receiver kit

PS20-RFK10: Named pneumatic transmitter-and-receiver kit

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: PS20-RFK10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 2: Exact contents · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge
PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 1: System task · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge
PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 1: Selection boundary · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge

Values apply to the exact identifier and scope in the cited source.
Exact contents	PS20-RF plus MRF-01; the spelling PS20-RFK10 has no extra hyphen before K10. PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 2: Exact contents · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge
System task	Pneumatic switch with embedded radio transmitter and its named receiver, connected to motor controls. PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 1: System task · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge
Selection boundary	This named pair does not establish whole-door suitability or resolve the conflicting MRF-01 supply ranges. PS20A and PS20-RF pneumatic systems and exact kit optionsPS20A20RF_Spec_20141208, PDF page 1: Selection boundary · checked 2026-09-14 · PS20A20RF_Spec_20141208 · Miller Edge

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.

Direct replacement paths

No direct successor for PS20-RFK10 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: PS20-RFK10 · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

PS20A and PS20-RF pneumatic systems and exact kit optionsMiller Edge · US · checked 2026-09-14 · PS20A20RF_Spec_20141208

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.