Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge MWR22B: Two-channel non-monitored wireless edge receiver

MWR22B: Two-channel non-monitored wireless edge receiver

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: MWR22B. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Input or outputNormally open and normally closed outputs
Power specification12-24 V AC/DC nominal; 60 mA nominal and 140 mA activated
Radio identification318 MHz with nine-position two-state DIP selection; listed range is 100 feet under optimal conditions. Frequency alone does not prove compatibility.
Monitoring boundaryThis is a non-monitored edge system. The source describes legacy door operators manufactured before August 2010. Confirm the installed operator and its protection requirements; an older manufacture date alone is not approval.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
MWT12B

Documented compatibility

From MWT12B to MWR22B.

MWT12B is explicitly paired with MWR22B in the non-monitored edge system.

Applies only within this source scope
  • Market: US
  • input: 2-wire normally open, non-monitored
  • Use the exact source-listed receiver/transmitter combination and confirm the installed operator requirements. No monitored capability, cross-generation radio fitment or downstream opener compatibility is established.
MWTA12B

Documented compatibility

From MWTA12B to MWR22B.

MWTA12B is explicitly paired with MWR22B in the non-monitored edge system.

Applies only within this source scope
  • Market: US
  • input: 2-wire normally open, non-monitored
  • Use the exact source-listed receiver/transmitter combination and confirm the installed operator requirements. No monitored capability, cross-generation radio fitment or downstream opener compatibility is established.

Direct replacement paths

No direct successor for MWR22B is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: MWR22B · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Two-Channel Wireless System MWR22B with MWT12B or MWTA12BMiller Edge · US · checked 2026-09-13 · MWR22B-MWT12B-MWTA12B_Spec_20240412

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability