Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge LED-ORION-24-K14: Interior door LED system, K14 size

LED-ORION-24-K14: Interior door LED system, K14 size

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: LED-ORION-24-K14. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Sectional selectionSection width: 14 ft 3 in and wider.
Rolling-steel selectionOpening width: 14 ft 8 in and wider. This uses a different width reference from the sectional-door table.
LED length14 ft 1 in. Width ranges describe the opening or door section, not continuous lighting across every inch of it.
Door applicationCommercial sectional and rolling-steel doors; not recommended for high-speed doors.
Activation and indicationOperator-signal activated, always-on lighting visible from the interior. The strip is green when open, red when closed and flashing red during motion.
Controller distinctionController indicator LEDs use green for open, red for closed and pulsing white during motion.
Mounting arrangementSectional applications use universal mounting channel; rolling-steel applications additionally use bottom-bar clips. The sheet notes off-center strip placement for doors wider than 18 feet.
Power and protection115-230 V supply with 24 V LED power; IP68 applies to the LED-strip component and NEMA 4 to the controller enclosure.
Cable discrepancyThe extension-cable row pairs 4 feet with 2.4 m. Confirm the supplied cable length; no corrected conversion is inferred.
Selection boundaryGeneric references to other safety devices do not enumerate compatible models. This is a visual alert accessory, not independent proof of sensing, monitoring or complete door-system approval.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.

Direct replacement paths

No direct successor for LED-ORION-24-K14 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: LED-ORION-24-K14 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Orion LED-ORION visual alert systemMiller Edge · US · checked 2026-09-14 · LED-ORION_Spec_20260521

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability