Miller Edge / Accessory reference

Miller Edge LC-K36: Non-monitored light curtain with 36-inch protection height

LC-K36: Non-monitored light curtain with 36-inch protection height

Match the whole number.

Manufacturer identifier: LC-K36. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact modelLC-K36 provides 36 inches of protection height with 8 elements. Body height is 38 inches.
View source and citation details
Operating span8-32 feet between the emitter and receiver; span differs from vertical protection height.
View source and citation details
Power and consumption12-24 V AC/DC; less than 150 mA at 24 V DC.
View source and citation details
Output identificationNormally open or normally closed output through the included MIRCU-02 control unit. This is a non-monitored configuration.
View source and citation details
Package and housingFour universal mounting brackets; PVC over aluminum housing with IP67 rating. MIRCU-02 is separately named as an included control unit.
View source and citation details
Selection boundaryConfirm that the installed operator permits the non-monitored application. This is not an alternative to required monitored entrapment protection; a legacy manufacture date alone is insufficient.
View source and citation details
Source-label issueThe lower application drawing repeats the 72-inch model label at the 3-foot position. The model heading and specification columns distinguish the 36-inch model; the inconsistent drawing label is not an alias.
View source and citation details
Monitoring wording conflictOne introductory sentence calls the device monitored, while the title, features and model options repeatedly identify it as non-monitored. No monitored capability or certification claim is approved from that sentence.
View source and citation details

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
MIRCU-02

Documented compatibility

From MIRCU-02 to LC-K36.

Conditional

MIRCU-02 is explicitly included with LC-K36 in the non-monitored LC specification.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.

Direct replacement paths

No direct successor for LC-K36 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Non-Monitored Light Curtain LC-K36 and LC-K72Miller Edge · US · checked 2026-09-14 · LC-K36-K72_20210101
  2. Infra-Red Control Unit MIRCU-02Miller Edge · US · checked 2026-09-14 · MIRCU-02_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.