Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge MIRCU-02: Photo-optic interface with non-monitored output

MIRCU-02: Photo-optic interface with non-monitored output

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: MIRCU-02. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Interface roleConverts a pulsed photo-optic signal to a non-monitored dry-contact output for a permitted legacy or supplementary application.
Input and outputTwo-wire pulsed monitored photo-eye input; normally open and normally closed non-monitored outputs.
Power and response12-24 V AC/DC; up to 50 mA; nominal 30 ms response.
HousingPolycarbonate housing, NEMA 4 Class 2 device; 1.75 H x 1.75 W x 6.625 L inches.
Exact compatible systemsThe compatible list names MIRM-S2, MIRM-S2-50, MIRM-T2, MIRM-T2-50, MIRM-Z2 and MIRM-Z2-50.
Named included systemsThe included-with list separately names MIRF-S2, MIRF-S2-50, MIRF-T2, MIRF-T2-50, MIRF-Z2 and MIRF-Z2-50.
Identity boundaryThe drawing caption omits the zero in MIRCU-2; the main heading and revision identify MIRCU-02. No alias or separate product is approved from that caption.
Selection boundaryConfirm that the installed operator permits the exact non-monitored or supplementary application. The device does not preserve a monitored output and must not be treated as a substitute for required monitored entrapment protection.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
LC-K36

Documented compatibility

From MIRCU-02 to LC-K36.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with LC-K36 in the non-monitored LC specification.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
LC-K72

Documented compatibility

From MIRCU-02 to LC-K72.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with LC-K72 in the non-monitored LC specification.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-S2

Documented compatibility

From MIRCU-02 to MIRF-S2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-S2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-S2-50

Documented compatibility

From MIRCU-02 to MIRF-S2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-S2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-T2

Documented compatibility

From MIRCU-02 to MIRF-T2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-T2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-T2-50

Documented compatibility

From MIRCU-02 to MIRF-T2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-T2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-Z2

Documented compatibility

From MIRCU-02 to MIRF-Z2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-Z2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRF-Z2-50

Documented compatibility

From MIRCU-02 to MIRF-Z2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly included with MIRF-Z2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-S2

Documented compatibility

From MIRCU-02 to MIRM-S2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-S2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-S2-50

Documented compatibility

From MIRCU-02 to MIRM-S2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-S2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-T2

Documented compatibility

From MIRCU-02 to MIRM-T2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-T2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-T2-50

Documented compatibility

From MIRCU-02 to MIRM-T2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-T2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-Z2

Documented compatibility

From MIRCU-02 to MIRM-Z2.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-Z2.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MIRM-Z2-50

Documented compatibility

From MIRCU-02 to MIRM-Z2-50.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

MIRCU-02 is explicitly listed as compatible with MIRM-Z2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MLC-K36

Documented compatibility

From MIRCU-02 to MLC-K36.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

The MLC sheet explicitly names MIRCU-02 as its interface to a non-monitored configuration.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.
MLC-K72

Documented compatibility

From MIRCU-02 to MLC-K72.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • output
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

The MLC sheet explicitly names MIRCU-02 as its interface to a non-monitored configuration.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.

Direct replacement paths

No direct successor for MIRCU-02 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: MIRCU-02 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Non-Monitored Light Curtain LC-K36 and LC-K72Miller Edge · US · checked 2026-09-14 · LC-K36-K72_20210101
  2. Infra-Red Control Unit MIRCU-02Miller Edge · US · checked 2026-09-14 · MIRCU-02_20210101
  3. Monitored Light Curtain MLC-K36 and MLC-K72Miller Edge · US · checked 2026-09-14 · MLC-K36-K72_20240515
  4. Rebel thru-beam photo-eye systemsMiller Edge · US · checked 2026-09-14 · Rebel_20210101
  5. Patriot-2 Telescopic traveling thru-beam photo-eye systemsMiller Edge · US · checked 2026-09-14 · MIRT2_20210101
  6. Patriot-2 Z-Flap traveling thru-beam photo-eye systemsMiller Edge · US · checked 2026-09-14 · MIRZ2_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability