Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge LC-K72: Non-monitored light curtain with 72-inch protection height

LC-K72: Non-monitored light curtain with 72-inch protection height

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: LC-K72. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact modelLC-K72 provides 72 inches of protection height with 16 elements. Body height is 74 inches.
Operating span8-32 feet between the emitter and receiver; span differs from vertical protection height.
Power and consumption12-24 V AC/DC; less than 150 mA at 24 V DC.
Output identificationNormally open or normally closed output through the included MIRCU-02 control unit. This is a non-monitored configuration.
Package and housingSix universal mounting brackets; PVC over aluminum housing with IP67 rating. MIRCU-02 is separately named as an included control unit.
Selection boundaryConfirm that the installed operator permits the non-monitored application. This is not an alternative to required monitored entrapment protection; a legacy manufacture date alone is insufficient.
Source-label issueThe lower application drawing repeats the 72-inch model label at the 3-foot position. The model heading and specification columns distinguish the 36-inch model; the inconsistent drawing label is not an alias.
Monitoring wording conflictOne introductory sentence calls the device monitored, while the title, features and model options repeatedly identify it as non-monitored. No monitored capability or certification claim is approved from that sentence.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
MIRCU-02

Documented compatibility

From MIRCU-02 to LC-K72.

MIRCU-02 is explicitly included with LC-K72 in the non-monitored LC specification.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.

Direct replacement paths

No direct successor for LC-K72 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: LC-K72 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Non-Monitored Light Curtain LC-K36 and LC-K72Miller Edge · US · checked 2026-09-14 · LC-K36-K72_20210101
  2. Infra-Red Control Unit MIRCU-02Miller Edge · US · checked 2026-09-14 · MIRCU-02_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability