Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge MIRF-S2-50: Rebel non-monitored photo-eye system, 50-foot class

MIRF-S2-50: Rebel non-monitored photo-eye system, 50-foot class

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: MIRF-S2-50. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact range option20-50 feet. The minimum span and the -50 suffix are part of selection; a longer-range model is not automatically interchangeable.
Output and packageThe MIRF model column specifies normally open and normally closed non-monitored output, with MIRCU-02 included.
Mechanical applicationFixed thru-beam system for motorized doors, using housings that can mount on a wall, floor or post.
Listed supplyThe system specification lists 8-30 V AC or 12-42 V DC. Confirm the power requirements of every supplied interface as well as the photo-optic system.
Included componentsOne wired emitter, one wired receiver and two Rebel housings; the MIRF option additionally includes MIRCU-02.
Housing and cableFlexible TPE and steel housings with steel brackets. Emitter cable: 32 feet; receiver cable: 3 feet. The sheet lists NEMA 4 and IP65.
Monitoring boundaryFail-safe and non-monitored are separate from operator-monitored protection. Confirm that the exact installed application permits this non-monitored output; it is not a substitute for required monitored protection.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
MIRCU-02

Documented compatibility

From MIRCU-02 to MIRF-S2-50.

MIRCU-02 is explicitly included with MIRF-S2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.

Direct replacement paths

No direct successor for MIRF-S2-50 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: MIRF-S2-50 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Infra-Red Control Unit MIRCU-02Miller Edge · US · checked 2026-09-14 · MIRCU-02_20210101
  2. Rebel thru-beam photo-eye systemsMiller Edge · US · checked 2026-09-14 · Rebel_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability