Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Miller Edge / Accessory reference

Miller Edge MIRM-T2-50: Patriot-2 Telescopic monitored photo-eye system, 50-foot class

MIRM-T2-50: Patriot-2 Telescopic monitored photo-eye system, 50-foot class

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: MIRM-T2-50. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact range option20-50 feet. The minimum span and the -50 suffix are part of selection; a longer-range model is not automatically interchangeable.
View source and citation details
Output and packageThe MIRM model column specifies pulsed output. MIRCU-02 is not listed as included with this monitored package.
View source and citation details
Mechanical applicationTraveling telescopic system for motorized sectional doors; mounting is at the leading door edge.
View source and citation details
Listed supplyThe system specification lists 8-30 V AC or 12-42 V DC. Confirm the power requirements of every supplied interface as well as the photo-optic system.
View source and citation details
Included componentsWired emitter and receiver, two telescopic housings, mounting brackets and holders, C222-15B coil cord, JB-02 junction box and hardware; MIRF models also include MIRCU-02.
View source and citation details
Housing and cableSteel housings and brackets. Emitter cable: 32 feet; receiver cable: 3 feet. The sheet lists NEMA 4 and IP65.
View source and citation details
Monitoring boundaryConfirm the exact pulsed operator input. Adding an interface with non-monitored output does not preserve the monitored system's original output.
View source and citation details

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
MIRCU-02

Documented compatibility

From MIRCU-02 to MIRM-T2-50.

Conditional

MIRCU-02 is explicitly listed as compatible with MIRM-T2-50.

Applies only within this source scope
  • Market: US
  • output: Non-monitored
  • Use only where the exact installed operator permits the documented non-monitored or supplementary application. MIRCU-02 does not preserve monitored output and is not a substitute for required monitored protection. Confirm the complete configuration with Miller Edge.

Direct replacement paths

No direct successor for MIRM-T2-50 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Infra-Red Control Unit MIRCU-02Miller Edge · US · checked 2026-09-14 · MIRCU-02_20210101
  2. Patriot-2 Telescopic traveling thru-beam photo-eye systemsMiller Edge · US · checked 2026-09-14 · MIRT2_20210101

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.