Miller Edge / Accessory reference
Miller Edge MEL-II-RX10: Monitored Edge Link-II receiver
This 916 MHz receiver is named with MEL-II-TX10 in the MEL-II-K10 system. It uses nominal 12-24 V AC/DC and lists 10K, pulsed and normally open outputs; select the output required by the exact operator.
Match the whole number.
Manufacturer identifier: MEL-II-RX10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 1: Named system · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Output options · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Power · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Identification · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Diagnostics · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Selection boundary · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
| Named system | Receiver supplied in the MEL-II-K10 system with MEL-II-TX10.View source and citation details
|
|---|---|
| Output options | 10K, pulsed and normally open outputs are listed; select for the exact operator.View source and citation details
|
| Power | Nominal 12-24 V AC/DC.View source and citation details
|
| Identification | 916 MHz; steel enclosure and an external whip antenna with F connector.View source and citation details
|
| Diagnostics | Power, status and two channel LEDs; the receiver provides a transmitter low-battery LED.View source and citation details
|
| Selection boundary | Confirm the exact paired transmitter and installed operator requirements; frequency alone does not establish fitment.View source and citation details
|
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.
| Equipment or component / relationship | Evidence and conditions |
|---|---|
| MEL-II-TX10 Documented compatibility From MEL-II-TX10 to MEL-II-RX10. | Conditional The exact transmitter and receiver are identified together in MEL-II-K10. Applies only within this source scope
|
Direct replacement paths
No direct successor for MEL-II-RX10 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- Monitored Edge Link-II MEL-II-K10Miller Edge · US · checked 2026-09-14 · MELII-K10_20210101
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.