Miller Edge / Accessory reference

Miller Edge MRF-01: Receiver for explicitly named pneumatic and air-wave systems

MRF-01 is named as the receiver in AW14-RF-K10 and PS20-RFK10 systems. The 2014 and 2021 sheets disagree on AC/DC supply limits and dimensions; confirm the exact receiver label and revision before selecting a supply.

Match the whole number.

Manufacturer identifier: MRF-01. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Named systemReceiver named with AW14-RF in the AW14-RF-K10 system.
View source and citation details
OutputTwo-wire normally open output; power, status and channel1 indicators.
View source and citation details
Supply as printed in this revision10-40 V AC or 10-30 V DC. Cross-source power conflict is unresolved; these limits must not become an unconditional supply recommendation.
View source and citation details
Dimensions as printed in this revision3-3/4 W x4-7/16 H x1-1/4 D inches (95 x113 x32 mm); dimensions differ from the older PS20 sheet.
View source and citation details
HousingPolycarbonate; attached wire antenna; listed weight3.9 ounces.
View source and citation details
Older receiver power limits - unresolvedThe 2014 PS20 document states 10-40 V DC or 10-30 V AC. The 2021 AW14RF document reverses these AC/DC ranges. Confirm the exact receiver label and revision with Miller Edge before selecting a supply; neither full range is established here as universally applicable.
View source and citation details
Older receiver dimensions - revision-dependentThe 2014 PS20 document lists 4 L x 3 W x 1 H inches. The 2021 AW14RF sheet gives different dimensions; confirm the actual receiver before choosing enclosure space or mounting hardware.
View source and citation details
Additional explicitly named systemPS20-RFK10 contains PS20-RF plus MRF-01. This exact system statement does not resolve the receiver specification conflict.
View source and citation details

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
AW14-RF

Documented compatibility

From AW14-RF to MRF-01.

Conditional

AW14-RF is explicitly named with MRF-01 in the reviewed source scope.

Applies only within this source scope
  • Market: US
  • Confirm the exact supplied components and source revision. Exact named radio system only; not a downstream opener compatibility claim.
  • MRF-01 supply ranges and dimensions conflict across these two documents. Confirm the installed receiver and power requirements with Miller Edge; no whole-door safety approval follows from this pair.
PS20-RF

Documented compatibility

From PS20-RF to MRF-01.

Conditional

PS20-RF is explicitly named with MRF-01 in the reviewed source scope.

Applies only within this source scope
  • Market: US
  • Confirm the exact supplied components and source revision. Explicit PS20-RFK10 pair; exact receiver supply and installed safety function still require confirmation.
  • MRF-01 supply ranges and dimensions conflict across these two documents. Confirm the installed receiver and power requirements with Miller Edge; no whole-door safety approval follows from this pair.

Direct replacement paths

No direct successor for MRF-01 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. AW14-RF-K10 wireless air-wave edge systemMiller Edge · US · checked 2026-09-14 · AW14RF_20210101
  2. PS20A and PS20-RF pneumatic systems and exact kit optionsMiller Edge · US · checked 2026-09-14 · PS20A20RF_Spec_20141208

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.