Miller Edge / Accessory reference

Miller Edge PS20-RF: Pneumatic switch with embedded transmitter

PS20-RF: Pneumatic switch with embedded transmitter

Match the whole number.

Manufacturer identifier: PS20-RF. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
IdentityWireless pneumatic switch with a transmitter inside its enclosure; distinct from wired PS20A.
Door scopeCoiling grilles and rolling, sectional and sliding doors; sheet limit18 feet.
PowerCR2032 3 V DC coin cell.
Temperature+14 to 158 degrees F (-10 to 70 degrees C).
Pressure and radioMaximum pressure 20 PSI; switching frequency 25 per second; receiver frequency 915 MHz and RF range up to 100 feet depending on conditions.
Selection boundaryThe sheet does not establish a monitored-output interface or compatibility with an arbitrary door operator. Confirm the exact receiver, control and required safety function.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
MRF-01

Documented compatibility

From PS20-RF to MRF-01.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

PS20-RF is explicitly named with MRF-01 in the reviewed source scope.

Applies only within this source scope
  • Market: US
  • Confirm the exact supplied components and source revision. Explicit PS20-RFK10 pair; exact receiver supply and installed safety function still require confirmation.
  • MRF-01 supply ranges and dimensions conflict across these two documents. Confirm the installed receiver and power requirements with Miller Edge; no whole-door safety approval follows from this pair.

Direct replacement paths

No direct successor for PS20-RF is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: PS20-RF · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. AW14-RF-K10 wireless air-wave edge systemMiller Edge · US · checked 2026-09-14 · AW14RF_20210101
  2. PS20A and PS20-RF pneumatic systems and exact kit optionsMiller Edge · US · checked 2026-09-14 · PS20A20RF_Spec_20141208

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability