Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Miller Edge / Accessory reference

Miller Edge RB-G-K10C: Two-channel monitored RBand system

RB-G-K10C: Two-channel monitored RBand system

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: RB-G-K10C. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Transmitter edge input10K (T2) monitored edge
Receiver output choices10K or normally closed receiver output
Documented pairing capacityUp to six transmitters across two channels; up to three per channel
Radio frequency916 MHz
Receiver power12-24 V AC/DC nominal, 100 mA maximum
Transmitter battery specificationTwo 3.6 V AA lithium cells
Source-stated range50 feet nominal; 100 feet only under optimal conditions
Named transmitterRB-TX10C
Selection boundaryMonitored system for configured commercial door or gate applications. Confirm the receiver output and exact installed operator. No compatibility with every operator or other similarly named radio is established.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
RB-TX10C

Documented compatibility

From RB-TX10C to RB-G-K10C.

RB-TX10C is explicitly listed for RB-G-K10C.

Applies only within this source scope
  • Market: US
  • input: 10K (T2) monitored edge
  • Up to six transmitters across two channels; up to three per channel. Match the exact system and required operator output; the radio pairing is not installed-operator compatibility.

Direct replacement paths

No direct successor for RB-G-K10C is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: RB-G-K10C · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. RBand RB monitored wireless sensing-edge systemsMiller Edge · US · checked 2026-09-13 · RB_Spec_20250609

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability