Miller Edge / Accessory reference
Miller Edge TG-R-NO-K10: Reflective photo-eye system
TG-R-NO-K10: Reflective photo-eye system
Match the whole number.
Manufacturer identifier: TG-R-NO-K10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- TruGuard TG-RTG-R_20250606, PDF page 1: Optical arrangement · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Exact output option · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Operating range · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Power and consumption · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Package identification · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Housing and cable · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Selection boundary · checked 2026-09-14 · TG-R_20250606 · Miller Edge
- TruGuard TG-RTG-R_20250606, PDF page 2: Temperature discrepancy · checked 2026-09-14 · TG-R_20250606 · Miller Edge
| Optical arrangement | Emitter and receiver share one housing and use a separate polarized corner-cube reflector.View source and citation details
|
|---|---|
| Exact output option | Normally open and normally closed. Preserve the complete suffix before selecting the operator interface.View source and citation details
|
| Operating range | 6-30 feet.View source and citation details
|
| Power and consumption | 12-40 V DC or 24-48 V AC; less than 40 mA listed consumption.View source and citation details
|
| Package identification | Emitter/receiver, its bracket/hood, reflector and reflector hood.View source and citation details
|
| Housing and cable | Emitter/receiver housing is listed as IP67, with 6-foot 20 AWG cable. The separate bracket is galvanized steel.View source and citation details
|
| Selection boundary | Confirm the exact operator and required monitoring output with Miller Edge. Output choices belong to the individual model; no family-wide electrical interchangeability or named-opener fitment is established.View source and citation details
|
| Temperature discrepancy | The temperature row pairs +141 F with +55 C; these values disagree. Confirm the applicable upper limit rather than treating either as a verified converted value.View source and citation details
|
Compare TruGuard output options by exact suffix
These reflective systems share a 6-to-30-foot operating range but list different 10K, normally open/closed and pulsed output choices. The pulsed kit names its included SM-102 interface. Keep the full suffix and required operator signal. The source's +141 F / +55 C upper-temperature discrepancy remains unresolved, and shared optical hardware does not establish electrical interchangeability.
| Exact reference | Exact output option |
|---|---|
| TG-R-K10 | 10K and normally closed. Preserve the complete suffix before selecting the operator interface. View source and citation details
|
| TG-R-NO-K10 This reference | Normally open and normally closed. Preserve the complete suffix before selecting the operator interface. View source and citation details
|
| TG-R-PKIT | Pulsed, with SM-102 included. Preserve the complete suffix before selecting the operator interface. View source and citation details
|
A specification absent from one reference is not established by the other. Keep the exact identifier, configuration and cited revision when comparing.
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.
Direct replacement paths
No direct successor for TG-R-NO-K10 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
This reference has no documented compatible or incompatible pairing to check. Use the facts and source scope above to identify the item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- TruGuard TG-RMiller Edge · US · checked 2026-09-14 · TG-R_20250606
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.