Miller Edge / Accessory reference
Miller Edge MEL-II-K10: Monitored door-edge wireless system
MEL-II-K10 combines the 916 MHz MEL-II-RX10 receiver and MEL-II-TX10 transmitter for a 10K monitored edge input. Its transmitter uses two AA 3.6 V lithium cells; MEL-K20 is a separate generation.
Match the whole number.
Manufacturer identifier: MEL-II-K10. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 1: System identity · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Signal selection · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Radio range · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Component power · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
- Monitored Edge Link-II MEL-II-K10MELII-K10_20210101, PDF page 2: Selection boundary · checked 2026-09-14 · MELII-K10_20210101 · Miller Edge
| System identity | The named system combines receiver MEL-II-RX10 and transmitter MEL-II-TX10. The kit is a separate identity from either component.View source and citation details
|
|---|---|
| Signal selection | The transmitter accepts a 10K monitored edge; the receiver lists 10K, pulsed and normally open outputs.View source and citation details
|
| Radio range | 916 MHz; 50 feet nominal, 100 feet maximum under optimal conditions.View source and citation details
|
| Component power | Receiver: nominal 12-24 V AC/DC. Transmitter: two AA 3.6 V lithium cells.View source and citation details
|
| Selection boundary | Confirm the exact installed door operator and its required monitoring signal. No interchangeability with MEL-K20 or other 916 MHz systems is established.View source and citation details
|
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
No equipment or component pairing is verified in this published reference. Match the exact equipment with Miller Edge official support before selecting a component.
Direct replacement paths
No direct successor for MEL-II-K10 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
This reference has no documented compatible or incompatible pairing to check. Use the facts and source scope above to identify the item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- Monitored Edge Link-II MEL-II-K10Miller Edge · US · checked 2026-09-14 · MELII-K10_20210101
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.