Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Miller Edge / Accessory reference

Miller Edge FSIS-35P-4: Isolating relay controller for specified sensing-edge applications

FSIS-35P-4: Isolating relay controller for specified sensing-edge applications

US source scopeUpdated 2026-09-14Independent Anderson reference

Match the whole number.

Manufacturer identifier: FSIS-35P-4. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Source applicationThe sheet describes an isolating switching amplifier with sensing-edge applications in explosive atmospheres. It does not approve an individual installation.
View source and citation details
Explicit edge groupThe related-products section names any model of 2/4-wire Miller Edge sensing edge. This is a component-input group, subject to the exact circuit and hazardous-location assessment.
View source and citation details
Power20-250 V AC or 20-125 V DC; listed power consumption is 3 W.
View source and citation details
Inputs and outputsOne 2/4-wire input channel; configurable output relay and alarm output relay, listed as two normally open outputs. Maximum switching capacity is listed as 2 A at 250 V.
View source and citation details
Mounting and enclosure35 mm DIN rail, polycarbonate/ABS housing and IP20 protection; 0.71 W x 4.1 H x 4.33 D inches.
View source and citation details
Selection boundaryAn edge in the named group is not automatically approved for a classified location or a complete safety function. Confirm exact edge configuration, circuit design, environmental classification and the applicable manufacturer documentation with the responsible qualified designer.
View source and citation details
Scope limitationNo wiring, monitoring-disable or commissioning procedure is provided here; the source's generalized ratings do not establish present certification of the installed system.
View source and citation details

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
Clima-GUARD

Documented compatibility

From Clima-GUARD to FSIS-35P-4.

Conditional

Clima-GUARD is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
CPT210

Documented compatibility

From CPT210 to FSIS-35P-4.

Conditional

CPT210 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 2-wire non-monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
CPT215

Documented compatibility

From CPT215 to FSIS-35P-4.

Conditional

CPT215 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 2-wire non-monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
  • Miller Edge CPT215 sensing edgeCPT210_Spec_20250917 (printed footer; both page headings identify CPT215), PDF page 2: Exact electric profile configuration · checked 2026-09-13 · CPT210_Spec_20250917 (printed footer; both page headings identify CPT215) · Miller Edge
  • FSIS-35P-4 intrinsically safe relay controllerFSIS-35P-4_20211111, PDF page 2: Any model 2/4-wire Miller Edge sensing edge · checked 2026-09-14 · FSIS-35P-4_20211111 · Miller Edge
MC22

Documented compatibility

From MC22 to FSIS-35P-4.

Conditional

MC22 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME110

Documented compatibility

From ME110 to FSIS-35P-4.

Conditional

ME110 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME111

Documented compatibility

From ME111 to FSIS-35P-4.

Conditional

ME111 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME112

Documented compatibility

From ME112 to FSIS-35P-4.

Conditional

ME112 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME113

Documented compatibility

From ME113 to FSIS-35P-4.

Conditional

ME113 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME116

Documented compatibility

From ME116 to FSIS-35P-4.

Conditional

ME116 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME117

Documented compatibility

From ME117 to FSIS-35P-4.

Conditional

ME117 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME120

Documented compatibility

From ME120 to FSIS-35P-4.

Conditional

ME120 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
ME123

Documented compatibility

From ME123 to FSIS-35P-4.

Conditional

ME123 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MT21

Documented compatibility

From MT21 to FSIS-35P-4.

Conditional

MT21 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MT22

Documented compatibility

From MT22 to FSIS-35P-4.

Conditional

MT22 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MT33

Documented compatibility

From MT33 to FSIS-35P-4.

Conditional

MT33 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MU21

Documented compatibility

From MU21 to FSIS-35P-4.

Conditional

MU21 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MU22

Documented compatibility

From MU22 to FSIS-35P-4.

Conditional

MU22 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.
MU33

Documented compatibility

From MU33 to FSIS-35P-4.

Conditional

MU33 is in the explicitly named Miller Edge 2/4-wire sensing-edge input group for FSIS-35P-4.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm exact input configuration and the full circuit with the responsible qualified designer. The group statement does not approve the edge for a classified location, establish intrinsic safety of the installation, or certify a complete door safety function.

Direct replacement paths

No direct successor for FSIS-35P-4 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Miller Edge Clima-GUARD sensing edgeMiller Edge · US · checked 2026-09-13 · CLIMAGUARD_20220307
  2. Miller Edge CPT210 sensing edgeMiller Edge · US · checked 2026-09-13 · CPT210_spec_20251112
  3. Miller Edge CPT215 sensing edgeMiller Edge · US · checked 2026-09-13 · CPT210_Spec_20250917 (printed footer; both page headings identify CPT215)
  4. FSIS-35P-4 intrinsically safe relay controllerMiller Edge · US · checked 2026-09-14 · FSIS-35P-4_20211111
  5. Miller Edge MC22 sensing edgeMiller Edge · US · checked 2026-09-13 · MC22_spec_20260506
  6. Miller Edge ME110 sensing edgeMiller Edge · US · checked 2026-09-13 · ME110_V7
  7. Miller Edge ME111 sensing edgeMiller Edge · US · checked 2026-09-13 · ME111_20201218
  8. Miller Edge ME112 sensing edgeMiller Edge · US · checked 2026-09-13 · ME112_20201218
  9. Miller Edge ME113 sensing edgeMiller Edge · US · checked 2026-09-13 · ME113_20201218
  10. Miller Edge ME116 sensing edgeMiller Edge · US · checked 2026-09-13 · ME116_20201218
  11. Miller Edge ME117 sensing edgeMiller Edge · US · checked 2026-09-13 · ME117_20201218
  12. Miller Edge ME120 sensing edgeMiller Edge · US · checked 2026-09-13 · ME120_20201218
  13. Miller Edge ME123 sensing edgeMiller Edge · US · checked 2026-09-13 · ME123_20201218
  14. Miller Edge MT21 sensing edgeMiller Edge · US · checked 2026-09-13 · MT_20201218
  15. Miller Edge MU21 sensing edgeMiller Edge · US · checked 2026-09-13 · MU21_20220607
  16. Miller Edge MU22 sensing edgeMiller Edge · US · checked 2026-09-13 · MU22_20220607
  17. Miller Edge MU33 sensing edgeMiller Edge · US · checked 2026-09-13 · MU33_20220512

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.