Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Miller Edge / Accessory reference

Miller Edge LED-ARIES-ME123C-K14: Dual-sided sectional-door LED system, K14 size

Aries K14 is listed for sectional-door sections 14 ft 3 in to 20 ft 2 in wide, with a 14 ft 1 in LED strip. It provides a visual door-status signal; the edge or loop seal is sold separately.

US source scopeUpdated 2026-09-15Independent Anderson reference

Match the whole number.

Manufacturer identifier: LED-ARIES-ME123C-K14. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact size selectionThis exact kit is listed for a sectional-door section width of 14 ft 3 in to 20 ft 2 in. Its LED strip length is 14 ft 1 in; strip length and door width are different dimensions.
View source and citation details
Door applicationFor 1-3/4-inch to 2-inch thick commercial motorized sectional doors. The manufacturer does not recommend this system for high-speed doors.
View source and citation details
Channel compatibilityThe integrated channel explicitly accepts ME123 or CPT215 sensing edges, or LS-0107 loop seal. These edge/seal components are sold separately.
View source and citation details
Activation and visibilityOperator-signal activation; continuously illuminated strip mounted inside and visible from both sides.
View source and citation details
Strip indicationsOpen: steady green. Closed: steady red. Opening or closing: flashing red.
View source and citation details
Controller indicationsController LEDs separately use green for open, red for closed and pulsing white for motion. Controller indicators differ from the door strip.
View source and citation details
Power and enclosureThe sheet specifies a 115-230 V supply and 24 V LED power. LED-strip component: IP68; controller enclosure: NEMA 4.
View source and citation details
Source discrepanciesThe drawing pairs 1.53 inches with 4 mm and the cable table pairs 4 feet with 2.4 m. These conversions disagree; confirm channel geometry and supplied cable length instead of using corrected guesses.
View source and citation details
Selection boundaryThe listed edge/loop-seal fit is mechanical. Confirm exact kit length, section thickness and operator signals; lighting does not establish monitoring or replacement of entrapment protection.
View source and citation details

Compare Aries section widths and LED lengths

Choose by sectional-door section width, then check the separate LED-strip length. These kits share the listed 1-3/4-inch to 2-inch section-thickness scope and high-speed-door exclusion. Edge and loop-seal components are sold separately. The channel and cable conversion conflicts remain unresolved; lighting does not establish monitoring or entrapment protection.

Separate references with their own source scope. This comparison establishes no replacement or interchangeability.
Exact referenceExact size selection
LED-ARIES-ME123C-K8
This exact kit is listed for a sectional-door section width of 8 ft 0 in to 10 ft 2 in. Its LED strip length is 7 ft 6 in; strip length and door width are different dimensions.
View source and citation details
LED-ARIES-ME123C-K10
This exact kit is listed for a sectional-door section width of 10 ft 3 in to 12 ft 2 in. Its LED strip length is 10 ft 2 in; strip length and door width are different dimensions.
View source and citation details
LED-ARIES-ME123C-K12
This exact kit is listed for a sectional-door section width of 12 ft 3 in to 14 ft 2 in. Its LED strip length is 11 ft 9 in; strip length and door width are different dimensions.
View source and citation details
LED-ARIES-ME123C-K14

This reference

This exact kit is listed for a sectional-door section width of 14 ft 3 in to 20 ft 2 in. Its LED strip length is 14 ft 1 in; strip length and door width are different dimensions.
View source and citation details

A specification absent from one reference is not established by the other. Keep the exact identifier, configuration and cited revision when comparing.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
CPT215

Documented compatibility

From LED-ARIES-ME123C-K14 to CPT215.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • door
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

LED-ARIES-ME123C-K14 explicitly accepts CPT215 in its integrated leading-edge channel.

Applies only within this source scope
  • Market: US
  • door: 1-3/4-inch to 2-inch sectional
  • Mechanical fit only. Confirm the exact section width, kit length and edge or loop seal; sensing components are sold separately. Not recommended for high-speed doors. This does not establish electrical monitoring or installed-operator approval.
  • Aries LED-ARIES visual alert systemLED-ARIES_Spec_20260521, PDF page 2: Exact kit options and compatibility list · checked 2026-09-14 · LED-ARIES_Spec_20260521 · Miller Edge
LS-0107

Documented compatibility

From LED-ARIES-ME123C-K14 to LS-0107.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • door
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

LED-ARIES-ME123C-K14 explicitly accepts LS-0107 in its integrated leading-edge channel.

Applies only within this source scope
  • Market: US
  • door: 1-3/4-inch to 2-inch sectional
  • Mechanical fit only. Confirm the exact section width, kit length and edge or loop seal; sensing components are sold separately. Not recommended for high-speed doors. This does not establish electrical monitoring or installed-operator approval.
  • Aries LED-ARIES visual alert systemLED-ARIES_Spec_20260521, PDF page 2: Exact kit options and compatibility list · checked 2026-09-14 · LED-ARIES_Spec_20260521 · Miller Edge
ME123

Documented compatibility

From LED-ARIES-ME123C-K14 to ME123.

Conditional

Additional source conditions or an adapter must be checked before confirming compatibility.

Details still needed
  • door
  • source conditions

Use the exact label and the source scope below. An unanswered condition keeps this result conditional or unverified.

LED-ARIES-ME123C-K14 explicitly accepts ME123 in its integrated leading-edge channel.

Applies only within this source scope
  • Market: US
  • door: 1-3/4-inch to 2-inch sectional
  • Mechanical fit only. Confirm the exact section width, kit length and edge or loop seal; sensing components are sold separately. Not recommended for high-speed doors. This does not establish electrical monitoring or installed-operator approval.
  • Aries LED-ARIES visual alert systemLED-ARIES_Spec_20260521, PDF page 2: Exact kit options and compatibility list · checked 2026-09-14 · LED-ARIES_Spec_20260521 · Miller Edge

Direct replacement paths

No direct successor for LED-ARIES-ME123C-K14 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: LED-ARIES-ME123C-K14 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Aries LED-ARIES visual alert systemMiller Edge · US · checked 2026-09-14 · LED-ARIES_Spec_20260521

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.