Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service
(203) 902-3902

Miller Edge / Accessory reference

Miller Edge FSC-57-115VAC: Enclosed sensing-edge relay controller

This 115 V AC FSC-57 package encloses an RT6 controller in a steel NEMA 13 housing with two LEDs and a reset button. The enclosure dimensions remain inconsistent between the source's inch and millimeter figures.

US source scopeUpdated 2026-09-15Independent Anderson reference

Match the whole number.

Manufacturer identifier: FSC-57-115VAC. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact model and packageFSC-57 packages the RT6 controller in a steel NEMA 13 enclosure with two LEDs and a reset button. Preserve the supply suffix.
View source and citation details
Power identificationThe exact model option and table specify 115 V AC.
View source and citation details
Edge input groupThe related-products list explicitly names any model of 4-wire Miller Edge sensing edge. The controller table lists single- or dual-channel inputs.
View source and citation details
Output identificationThree normally open outputs and one normally closed output. Exact load and reset configuration require the specific controller documentation.
View source and citation details
Mounting and protectionExternal screw-mounting tabs and a steel NEMA 13 enclosure; the controller and terminal blocks retain separate IP40 and IP20 ratings.
View source and citation details
Source limitationsThe enclosed model's height/depth figures in inches and millimeters disagree; confirm physical clearance. The temperature row pairs 133 F with 55 C, which are inconsistent. No corrected upper limit is inferred.
View source and citation details
Selection boundaryConfirm the exact four-wire edge configuration, supply, required reset behavior and complete safety circuit with a qualified designer. The group match is not an installed-door or current certification approval.
View source and citation details

Compare RT6 controllers and FSC-57 enclosed packages

Match the supply suffix and package separately. RT6 is the DIN-rail controller; FSC-57 encloses it in a steel housing. The VDC options retain the source's unresolved AC statement. Keep controller, terminal-block and enclosure protection ratings separate, and confirm the recorded temperature and clearance conflicts. The shared four-wire input group does not approve a complete installed safety circuit.

Separate references with their own source scope. This comparison establishes no replacement or interchangeability.
Exact referenceExact model and packagePower identificationMounting and protectionSource limitations
RT6-115VAC
RT6 is the DIN-rail controller. It is a separate product identity from the FSC-57 enclosed package.
View source and citation details
The exact model option and table specify 115 V AC.
View source and citation details
35 mm DIN-rail mounting with ABS housing; controller IP40 and connection blocks IP20.
View source and citation details
The temperature row pairs 133 F with 55 C, which are inconsistent. No corrected upper limit is inferred.
View source and citation details
FSC-57-115VAC

This reference

FSC-57 packages the RT6 controller in a steel NEMA 13 enclosure with two LEDs and a reset button. Preserve the supply suffix.
View source and citation details
The exact model option and table specify 115 V AC.
View source and citation details
External screw-mounting tabs and a steel NEMA 13 enclosure; the controller and terminal blocks retain separate IP40 and IP20 ratings.
View source and citation details
The enclosed model's height/depth figures in inches and millimeters disagree; confirm physical clearance. The temperature row pairs 133 F with 55 C, which are inconsistent. No corrected upper limit is inferred.
View source and citation details
RT6-24VDC
RT6 is the DIN-rail controller. It is a separate product identity from the FSC-57 enclosed package.
View source and citation details
The model name and first-page feature list specify 24 V DC, while the power table says 24 V AC/DC. AC acceptance is unresolved; confirm the exact unit's supply requirements.
View source and citation details
35 mm DIN-rail mounting with ABS housing; controller IP40 and connection blocks IP20.
View source and citation details
The temperature row pairs 133 F with 55 C, which are inconsistent. No corrected upper limit is inferred.
View source and citation details
FSC-57-24VDC
FSC-57 packages the RT6 controller in a steel NEMA 13 enclosure with two LEDs and a reset button. Preserve the supply suffix.
View source and citation details
The model name and first-page feature list specify 24 V DC, while the power table says 24 V AC/DC. AC acceptance is unresolved; confirm the exact unit's supply requirements.
View source and citation details
External screw-mounting tabs and a steel NEMA 13 enclosure; the controller and terminal blocks retain separate IP40 and IP20 ratings.
View source and citation details
The enclosed model's height/depth figures in inches and millimeters disagree; confirm physical clearance. The temperature row pairs 133 F with 55 C, which are inconsistent. No corrected upper limit is inferred.
View source and citation details

A specification absent from one reference is not established by the other. Keep the exact identifier, configuration and cited revision when comparing.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Read the documented direction and conditions for each pairing.
Equipment or component / relationshipEvidence and conditions
Clima-GUARD

Documented compatibility

From Clima-GUARD to FSC-57-115VAC.

Conditional

Clima-GUARD is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
MC22

Documented compatibility

From MC22 to FSC-57-115VAC.

Conditional

MC22 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
  • Miller Edge MC22 sensing edgeMC22_spec_20260506, PDF page 2: Exact four-wire monitored profile option · checked 2026-09-13 · MC22_spec_20260506 · Miller Edge
  • RT6 and FSC-57 safety relay controllersRT6_FSC-57_20211111, PDF page 2: Any model 4-wire Miller Edge sensing edge and model columns · checked 2026-09-14 · RT6_FSC-57_20211111 · Miller Edge
ME110

Documented compatibility

From ME110 to FSC-57-115VAC.

Conditional

ME110 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME111

Documented compatibility

From ME111 to FSC-57-115VAC.

Conditional

ME111 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME112

Documented compatibility

From ME112 to FSC-57-115VAC.

Conditional

ME112 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME113

Documented compatibility

From ME113 to FSC-57-115VAC.

Conditional

ME113 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME116

Documented compatibility

From ME116 to FSC-57-115VAC.

Conditional

ME116 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME117

Documented compatibility

From ME117 to FSC-57-115VAC.

Conditional

ME117 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME120

Documented compatibility

From ME120 to FSC-57-115VAC.

Conditional

ME120 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
ME123

Documented compatibility

From ME123 to FSC-57-115VAC.

Conditional

ME123 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
MT21

Documented compatibility

From MT21 to FSC-57-115VAC.

Conditional

MT21 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
MT22

Documented compatibility

From MT22 to FSC-57-115VAC.

Conditional

MT22 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
MT33

Documented compatibility

From MT33 to FSC-57-115VAC.

Conditional

MT33 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
MU21

Documented compatibility

From MU21 to FSC-57-115VAC.

Conditional

MU21 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
  • Miller Edge MU21 sensing edgeMU21_20220607, PDF page 2: Exact four-wire monitored profile option · checked 2026-09-13 · MU21_20220607 · Miller Edge
  • RT6 and FSC-57 safety relay controllersRT6_FSC-57_20211111, PDF page 2: Any model 4-wire Miller Edge sensing edge and model columns · checked 2026-09-14 · RT6_FSC-57_20211111 · Miller Edge
MU22

Documented compatibility

From MU22 to FSC-57-115VAC.

Conditional

MU22 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
  • Miller Edge MU22 sensing edgeMU22_20220607, PDF page 2: Exact four-wire monitored profile option · checked 2026-09-13 · MU22_20220607 · Miller Edge
  • RT6 and FSC-57 safety relay controllersRT6_FSC-57_20211111, PDF page 2: Any model 4-wire Miller Edge sensing edge and model columns · checked 2026-09-14 · RT6_FSC-57_20211111 · Miller Edge
MU33

Documented compatibility

From MU33 to FSC-57-115VAC.

Conditional

MU33 is within the exact four-wire Miller Edge input group listed for FSC-57-115VAC.

Applies only within this source scope
  • Market: US
  • configuration: 4-wire monitored
  • Confirm the controller supply, edge circuit, reset requirements and installed door safety function with a qualified designer. This is component-input scope only. This exact model specifies 115 V AC.
  • Miller Edge MU33 sensing edgeMU33_20220512, PDF page 2: Exact four-wire monitored profile option · checked 2026-09-13 · MU33_20220512 · Miller Edge
  • RT6 and FSC-57 safety relay controllersRT6_FSC-57_20211111, PDF page 2: Any model 4-wire Miller Edge sensing edge and model columns · checked 2026-09-14 · RT6_FSC-57_20211111 · Miller Edge
RT6-115VAC

Documented compatibility

From RT6-115VAC to FSC-57-115VAC.

Conditional

The matching-voltage FSC-57 package is explicitly described as an RT6 inside its enclosure.

Applies only within this source scope
  • Market: US
  • configuration: 115 V AC model identity
  • Confirm the exact supplied configuration and the installed operator requirements. This component relationship is limited to the documented package, input or mechanical role; it does not approve a complete door safety system.

Direct replacement paths

No direct successor for FSC-57-115VAC is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Miller Edge Clima-GUARD sensing edgeMiller Edge · US · checked 2026-09-13 · CLIMAGUARD_20220307
  2. Miller Edge MC22 sensing edgeMiller Edge · US · checked 2026-09-13 · MC22_spec_20260506
  3. Miller Edge ME110 sensing edgeMiller Edge · US · checked 2026-09-13 · ME110_V7
  4. Miller Edge ME111 sensing edgeMiller Edge · US · checked 2026-09-13 · ME111_20201218
  5. Miller Edge ME112 sensing edgeMiller Edge · US · checked 2026-09-13 · ME112_20201218
  6. Miller Edge ME113 sensing edgeMiller Edge · US · checked 2026-09-13 · ME113_20201218
  7. Miller Edge ME116 sensing edgeMiller Edge · US · checked 2026-09-13 · ME116_20201218
  8. Miller Edge ME117 sensing edgeMiller Edge · US · checked 2026-09-13 · ME117_20201218
  9. Miller Edge ME120 sensing edgeMiller Edge · US · checked 2026-09-13 · ME120_20201218
  10. Miller Edge ME123 sensing edgeMiller Edge · US · checked 2026-09-13 · ME123_20201218
  11. Miller Edge MT21 sensing edgeMiller Edge · US · checked 2026-09-13 · MT_20201218
  12. Miller Edge MU21 sensing edgeMiller Edge · US · checked 2026-09-13 · MU21_20220607
  13. Miller Edge MU22 sensing edgeMiller Edge · US · checked 2026-09-13 · MU22_20220607
  14. Miller Edge MU33 sensing edgeMiller Edge · US · checked 2026-09-13 · MU33_20220512
  15. RT6 and FSC-57 safety relay controllersMiller Edge · US · checked 2026-09-14 · RT6_FSC-57_20211111

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Miller Edge official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.