Denco supplier catalog / Part reference

GO 37561S.S: 8 ft belt and bullet assembly

Denco identifies this listing as a belt and bullet assembly for a 8 ft belt rail. Denco's US supplier listing; product-specific market/revision applicability is not established. Supplier statements are not manufacturer engineering verification.

US source scopeUpdated 2026-09-12Independent Anderson reference

Match the whole number.

Denco catalog number: GO 37561S.S. Keep the complete supplier number, including prefixes and suffixes. This identifies the supplier catalog listing.

A corresponding manufacturer part number or equivalent component has not been verified. Any manufacturer or designation stated by the supplier is labeled separately below.

Denco supplier reference: GO 37561S.Sspan.sku · checked 2026-09-12 · Denco

Denco supplier reference: GO 37561S.SProduct h1 and span.sku · checked 2026-09-12 · Denco

Values apply to the exact identifier and scope in the cited source.
Supplier catalog number	GO 37561S.S Denco supplier reference: GO 37561S.Sspan.sku · checked 2026-09-12 · Denco
Supplier-stated detail	Denco identifies this listing as a belt and bullet assembly for a 8 ft belt rail. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Supplier-stated detail	The source names model-number prefixes 3020, 3042, 3024, 3120, 4042, 4024. These are prefix statements, not an enumerated full-model list. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	The described opener must have the stated 8-foot belt rail. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	The source explicitly uses model-number prefix matching; suffixes and complete label variants are not enumerated. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	No production years, belt physical measurement, itemized kit inventory or electrical/protocol scope is supplied. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	No full-suffix model fitment, alias, reverse relationship or transitive mapping is inferred. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	1028 and 2028 appear on the seven-foot page but are absent here; this absence is not an explicit incompatibility statement. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco
Scope limitation	The source describes a 8-foot belt rail; this is not a measured belt circumference or an independently established door-height specification. Denco supplier reference: GO 37561S.SProduct h1 and span.sku; Description first list item · checked 2026-09-12 · Denco

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

No equipment or component pairing is verified in this published reference. Match the exact equipment with Denco catalog source before selecting a component.

Direct replacement paths

No direct successor for GO 37561S.S is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Part or accessory brand

Narrow part or accessory choices by the complete number (optional)

Loading part or accessory choices…

Part or accessory

Selected: GO 37561S.S · Read its reference. Selection identifies a record; it does not confirm fitment.

Equipment or accessory brand

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Equipment market

Production date, if known

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

Denco supplier reference: GO 37561S.SDenco · US · checked 2026-09-12

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Denco catalog source and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.