Connecticut Garage Door Repair & InstallationOpen 24 Hours — 7 Days a Week
Anderson Garage Door Service
Call for Service(203) 902-3902Call anytime · appointments based on current availability

Rytec / Part reference

Rytec 0-499-080: left pneumatic cylinder components

Identify the documented components of left pneumatic cylinder 0-499-080, with source-specific quantities and configuration limits.

US source scopeUpdated 2026-09-13Independent Anderson reference

Match the whole number.

Manufacturer identifier: 0-499-080. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.

Values apply to the exact identifier and scope in the cited source.
Exact printed identifier0-499-080
IdentificationLeft cylinder module; includes8, 9, 10, 11, 20, 21
Serial and revision scopeFast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure.
Quantity scopeQuantities in the source table cover the shared installation, not each parent assembly.
Handed contentsOnly the left module explicitly includes item 21, valve 0-404-077. Preserve the separate left/right assembly numbers; no reverse fitment or incompatibility is inferred.
0-404-082Male rod end, 1/2-20 UNF. Source-table quantity: 2. Quantities in the source table cover the shared installation, not each parent assembly.
0-550-197Jam nut, 1/2-20 UNF-3 A as printed. Source-table quantity: 2. Quantities in the source table cover the shared installation, not each parent assembly.
0-404-001Pneumatic cylinder, 2.5 in bore. Source-table quantity: 2. Quantities in the source table cover the shared installation, not each parent assembly.
0-404-073Push-type90-degree air fitting. Source-table quantity: 3. Quantities in the source table cover the shared installation, not each parent assembly.
0-404-078Bushing, 1/2 in bore and 5/8 in outside diameter. Source-table quantity: 2. Quantities in the source table cover the shared installation, not each parent assembly.
0-404-077Flow-control air valve, 3/8 in. Source-table quantity: 1. Quantities in the source table cover the shared installation, not each parent assembly.

Documented fitment & exclusions

Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.

A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.

Source statements and their exact conditions. Use the checker below to compare equipment or a component.
Equipment or component / relationshipEvidence and conditions
0-404-001

Documented compatibility

From 0-404-001 to 0-499-080.

0-499-080 lists item 10, 0-404-001: Pneumatic cylinder, 2.5 in bore.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 10.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0-404-073

Documented compatibility

From 0-404-073 to 0-499-080.

0-499-080 lists item 11, 0-404-073: Push-type90-degree air fitting.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 11.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0-404-077

Documented compatibility

From 0-404-077 to 0-499-080.

0-499-080 lists item 21, 0-404-077: Flow-control air valve, 3/8 in.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 21.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0-404-078

Documented compatibility

From 0-404-078 to 0-499-080.

0-499-080 lists item 20, 0-404-078: Bushing, 1/2 in bore and 5/8 in outside diameter.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 20.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
  • Rytec Fast-Fold pneumatic manual, February 23, 2006R0415238, February 23, 2006, PDF page 27 / printed page 23: 0-499-080 lists item 20, 0-404-078: Bushing, 1/2 in bore and 5/8 in outside diameter. · checked 2026-09-13 · R0415238, February 23, 2006 · Rytec
0-404-082

Documented compatibility

From 0-404-082 to 0-499-080.

0-499-080 lists item 8, 0-404-082: Male rod end, 1/2-20 UNF.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 8.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.
0-550-197

Documented compatibility

From 0-550-197 to 0-499-080.

0-499-080 lists item 9, 0-550-197: Jam nut, 1/2-20 UNF-3 A as printed.

Applies only within this source scope
  • Market: US
  • assembly-configuration: Fast-Fold pneumatic configuration, R0415238, revision February 23, 2006. Confirm the door serial and installed equipment with Rytec. Special engineering and later changes can alter fitted parts. This historical identification reference supplies no current availability, replacement successor or installation procedure. Exact parent 0-499-080; item 9.
  • Quantities in the source table cover the shared installation, not each parent assembly.
  • Direct listed component association only. No whole-door fitment, successor, reverse/transitive relationship, ordering entitlement or wiring equivalence is inferred.

Direct replacement paths

No direct successor for 0-499-080 is verified in this reference.

A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.

Compare exact equipment or a component.

Check a part or accessory pairing

Loading part or accessory choices…

Selected: 0-499-080 · Read its reference. Selection identifies a record; it does not confirm fitment.

Choose the equipment or accessory brand separately from the component brand. A missing identifier is unverified. Use the model library to identify your equipment and its source documents.

An accessory pairing, including a receiver or wall console, applies only to the exact listed pair and source conditions. It does not establish suitability for your installed opener or compatibility through another device.

Choose the equipment or accessory brand to load its published identifiers.

Use the production date on the label or records, not the purchase date. Leave blank if unknown.

Use part and model numbers only. Never enter a serial number, PIN or access code. Your entry is used for this lookup and is not put in the page address, saved in browser storage or sent to analytics.

Choose a task and enter or select an exact identifier.

Recall references

No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.

Sources & scope

  1. Rytec Fast-Fold pneumatic manual, February 23, 2006Rytec · US · checked 2026-09-13 · R0415238, February 23, 2006

Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.

Related equipment guides

Browse the model library →

Confirm a missing detail

Use Rytec official support and match the complete part number, equipment model and production details with the source scope.

Use safely accessible labels and existing paperwork. Do not remove powered covers or adjust springs or cables to identify a component.

This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status. Anderson provides repair service in its listed Connecticut communities.

A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.

Call (203) 902-3902 — Check Today's Availability