Rytec / Part reference
Rytec 0399402: Left trolley assembly
Identify the components explicitly listed for the left trolley assembly and distinguish its handed parts and source limitations.
Match the whole number.
Manufacturer identifier: 0399402. Keep every character when comparing it with your label or paperwork. A similar number does not establish the same component.
- Rytec Arctec owner manual, August 21, 20080315401, revision August 21, 2008, PDF page 37 / printed page 31: Exact component 0399402 · checked 2026-09-13 · 0315401, August 21, 2008 · Rytec
| Exact manual number | 0399402View source and citation details
|
|---|---|
| Identification | Left trolley assemblyView source and citation details
|
| Serial and revision scope | Arctec manual 0315401, revision August 21, 2008. Confirm the exact door serial number and installed assembly with Rytec; the manual warns that product changes and special engineering can change the fitted parts. This is document-based identification, not an installation procedure or universal fitment.View source and citation details
|
| Item 1: 0304123 | Track roller, 2-1/2-inch diameter. Table quantity: 4.View source and citation details
|
| Item 2: S021718 | Stainless clevis pin, 1/2-inch diameter by 2-1/4 inches. Table quantity: 2.View source and citation details
|
| Item 3: 0021033 | Knurled-point set screw. Table quantity: 4.View source and citation details
|
| Item 4: 0303413 | Trolley axle. Table quantity: 2.View source and citation details
|
| Item 5: 0021699 | External retaining ring, 17 millimeters. Table quantity: 4.View source and citation details
|
| Item 6: 0553104 | Nut. Table quantity: 8.View source and citation details
|
| Item 7: 0303417 | Drive-belt clamp. Table quantity: 1.View source and citation details
|
| Item 8: 0303411 | Short trolley body. Table quantity: 1.View source and citation details
|
| Item 9: 0021700 | Roll pin. Table quantity: 2.View source and citation details
|
| Item 10: 0021715 | M10 flat washer. Table quantity: 4.View source and citation details
|
| Item 11: 0021717 | Bronze washer. Table quantity: 4.View source and citation details
|
| Item 12: 0305442 | Guide roller in the left and one-way trolley tables. Table quantity: 2.View source and citation details
|
| Item 13: 0021760 | Metric screw, 10 by 25 millimeters. Table quantity: 2.View source and citation details
|
| Item 14: 0303414 | Panel-hanger angle. Table quantity: 2.View source and citation details
|
| Item 15: 0550060 | Screw. Table quantity: 4.View source and citation details
|
| Item 16: 0301427 | Spreader channel. Table quantity: 1.View source and citation details
|
| Item 17: 0553229 | Nut. Table quantity: 2.View source and citation details
|
| Item 18: 0550330 | Screw. Table quantity: 2.View source and citation details
|
| Item 19: 0303415 | Short come-along bracket. Table quantity: 1.View source and citation details
|
| Item 20: 0303410 | Long trolley body. Table quantity: 1.View source and citation details
|
| Unresolved hardware 0550193 | The table lists quantity 4, but this number has conflicting lengths elsewhere in the manual. No component compatibility relationship is approved.View source and citation details
|
| Handed guide-roller selection | The left trolley lists 0305442 while the right trolley lists 0305422. Shared rollers, axles and bodies do not establish interchangeability of the complete assemblies.View source and citation details
|
Documented fitment & exclusions
Read the exact equipment or component, market, production and variant limits in every row. An omitted pairing has not been verified by this reference.
A component pairing applies only to the listed items and source conditions. It does not establish suitability for an installed opener or compatibility through another component.
| Equipment or component / relationship | Evidence and conditions |
|---|---|
| 0021033 Documented compatibility From 0021033 to 0399402. | Conditional Rytec lists 0021033 in the 0399402 breakdown: knurled-point set screw. Applies only within this source scope
|
| 0021699 Documented compatibility From 0021699 to 0399402. | Conditional Rytec lists 0021699 in the 0399402 breakdown: external retaining ring, 17 millimeters. Applies only within this source scope
|
| 0021700 Documented compatibility From 0021700 to 0399402. | Conditional Rytec lists 0021700 in the 0399402 breakdown: roll pin. Applies only within this source scope
|
| 0021715 Documented compatibility From 0021715 to 0399402. | Conditional Rytec lists 0021715 in the 0399402 breakdown: m10 flat washer. Applies only within this source scope
|
| 0021717 Documented compatibility From 0021717 to 0399402. | Conditional Rytec lists 0021717 in the 0399402 breakdown: bronze washer. Applies only within this source scope
|
| 0021760 Documented compatibility From 0021760 to 0399402. | Conditional Rytec lists 0021760 in the 0399402 breakdown: metric screw, 10 by 25 millimeters. Applies only within this source scope
|
| 0301427 Documented compatibility From 0301427 to 0399402. | Conditional Rytec lists 0301427 in the 0399402 breakdown: spreader channel. Applies only within this source scope
|
| 0303410 Documented compatibility From 0303410 to 0399402. | Conditional Rytec lists 0303410 in the 0399402 breakdown: long trolley body. Applies only within this source scope
|
| 0303411 Documented compatibility From 0303411 to 0399402. | Conditional Rytec lists 0303411 in the 0399402 breakdown: short trolley body. Applies only within this source scope
|
| 0303413 Documented compatibility From 0303413 to 0399402. | Conditional Rytec lists 0303413 in the 0399402 breakdown: trolley axle. Applies only within this source scope
|
| 0303414 Documented compatibility From 0303414 to 0399402. | Conditional Rytec lists 0303414 in the 0399402 breakdown: panel-hanger angle. Applies only within this source scope
|
| 0303415 Documented compatibility From 0303415 to 0399402. | Conditional Rytec lists 0303415 in the 0399402 breakdown: short come-along bracket. Applies only within this source scope
|
| 0303417 Documented compatibility From 0303417 to 0399402. | Conditional Rytec lists 0303417 in the 0399402 breakdown: drive-belt clamp. Applies only within this source scope
|
| 0304123 Documented compatibility From 0304123 to 0399402. | Conditional Rytec lists 0304123 in the 0399402 breakdown: track roller, 2-1/2-inch diameter. Applies only within this source scope
|
| 0305442 Documented compatibility From 0305442 to 0399402. | Conditional Rytec lists 0305442 in the 0399402 breakdown: guide roller in the left and one-way trolley tables. Applies only within this source scope
|
| 0550060 Documented compatibility From 0550060 to 0399402. | Conditional Rytec lists 0550060 in the 0399402 breakdown: screw. Applies only within this source scope
|
| 0550330 Documented compatibility From 0550330 to 0399402. | Conditional Rytec lists 0550330 in the 0399402 breakdown: screw. Applies only within this source scope
|
| 0553104 Documented compatibility From 0553104 to 0399402. | Conditional Rytec lists 0553104 in the 0399402 breakdown: nut. Applies only within this source scope
|
| 0553229 Documented compatibility From 0553229 to 0399402. | Conditional Rytec lists 0553229 in the 0399402 breakdown: nut. Applies only within this source scope
|
| S021718 Documented compatibility From S021718 to 0399402. | Conditional Rytec lists S021718 in the 0399402 breakdown: stainless clevis pin, 1/2-inch diameter by 2-1/4 inches. Applies only within this source scope
|
Direct replacement paths
No direct successor for 0399402 is verified in this reference.
A direct replacement statement does not establish reverse interchangeability, a kit equivalent or a later replacement chain.
The listed pairing applies in the direction shown above. Open the listed component’s reference to check its pairing with this item. You can also look up another part or accessory. A missing pairing does not establish incompatibility.
Recall references
No recall reference is included for this identifier in the published dataset. This is not a safety clearance or proof that no recall exists.
Sources & scope
- Rytec Arctec owner manual, August 21, 2008Rytec · US · checked 2026-09-13 · 0315401, August 21, 2008
Anderson prepared this reference from the listed evidence. Source statements are not an Anderson installation inspection or independent product test. Official documents stay on their publisher’s website.
This is an independent Anderson reference. Manufacturer names identify the equipment and do not imply affiliation or authorized-dealer status.
A reference listing does not establish current stock, a price, eligibility for manufacturer support or that a component is faulty.
